|
XC90 '02–'15 General Forum for the P2-platform XC90 model |
Information |
|
Geartronic Stuck In Drive And NeturalViews : 7971 Replies : 12Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Apr 23rd, 2017, 14:17 | #1 |
Junior Member
Last Online: Mar 25th, 2018 08:12
Join Date: Dec 2016
Location: Gloucester
|
Geartronic Stuck In Drive And Netural
( Selector stuck in Neutral And Drive )
Hi Has any one got advise for the following problem Today after trying to park my XC90 2004 I was unable to select Reverse or Park so now unable to take the key from the car :-( I found this on the forum but that's to do with stuck in Park unable to select Drive but great help to get at the linkage http://www.volvoforums.org.uk/showthread.php?t=110901 This is my problem if it helps to view : !!! https://www.youtube.com/watch?v=GgM5...m-upload_owner Regards Pete Last edited by Peter Hilsdon; Apr 23rd, 2017 at 15:38. Reason: Neutral And Drive |
Apr 23rd, 2017, 16:32 | #2 |
Premier Member
Last Online: Jan 15th, 2024 17:24
Join Date: Jun 2010
Location: Bury St Edmunds
|
As you said in the video, you need to depress the paddle on the front of the gear lever handle to get from N to R. There is a mechanical lock which is electrically operated:
Shift-lock To avoid any chance of the gear selector inadvertently moving from the P position, the car is also equipped with an electrically operated shift-lock function. This locks the interlock pin in the gear selector lever in the shift-lock section, locking the selector lever in the P position. To move the gear selector from the P position, the ignition must be switched on and the brake pedal depressed. (The stop lamp switch is activated.). The central electronic module (CEM) reads the position of the brake pedal via direct connection to the brake pedal sensor and transmits a signal to the gear selector control module (GSM) to deactivate the solenoid in the gear lever selector. The solenoid lock pin is pushed in and the gear selector lock button can be pressed down as usual to select another gear. When the ignition is in position "0", the solenoid is deactivated. In this position the shifter is mechanically locked by the key lock cable. That's where you should investigate. It may be this solenoid lock which is causing the problem. To open the lock you need: Power on Brake pedal pressed Paddle on gear selector depressed? Also check the brake pedal sensor. If you don't find the issue look for mechanical problems in the interlocks.
__________________
Greg Last edited by gmonag; Apr 23rd, 2017 at 16:57. |
The Following User Says Thank You to gmonag For This Useful Post: |
Apr 23rd, 2017, 19:56 | #3 |
Junior Member
Last Online: Mar 25th, 2018 08:12
Join Date: Dec 2016
Location: Gloucester
|
Selector Stuck in Neutral & Drive
Hi gmonag
I have now released the selector and got the car into park. I had to push the leaver at the front of the Selector upwards not depressed it as normal !!!!! I was then able to squeeze the leaver at the front of the selector and was now getting resistance / spring type feeling if that make sense? Seem to be something inside the top of the selector leaver was misaligned and the leaver was not working at all no resistance just free play.? Not sure why pushing the other way got it to work but I will need to look further into to find out as it might happen again. Thanks for the help anyway this is a very useful and helpful forum. Might have to look for a new selector stick / leaver Regards Pete :-) |
Apr 24th, 2017, 09:00 | #4 |
Junior Member
Last Online: Mar 25th, 2018 08:12
Join Date: Dec 2016
Location: Gloucester
|
Gear Shift Replacement
I now believe that the release switch on the top of the
Gear Shift is loose - Broken and needs a switch replacement. I think the Part Number is 8675628 for a Volvo XC90 D5 SE silver top / Chrome I have looked on YouTube and it seems with force pull out and replace the reverse way. ( Its a shame you cannot just buy a new switch to fit :-( https://www.youtube.com/watch?v=Cu81vZO-hUQ&t=971s Its a bit long but all I could find on this problem Not sure if anyone else has had the same problem.? Regards Pete. Will keep you updated to Price and fitting Last edited by Peter Hilsdon; Apr 24th, 2017 at 09:17. |
Apr 25th, 2017, 13:53 | #5 |
Junior Member
Last Online: Mar 25th, 2018 08:12
Join Date: Dec 2016
Location: Gloucester
|
Gear Shift Replacement
Have now removed the Gear Shift and found the broken part that caused the problem :-) see pic 1
Replacement part on order from Volvo Gloucester due in tomorrow. Cost £112.00 Had to buy a replacement Gear Shift Gaiter from Ebay as Volvo. Cost was 56.88. Ebay was £9.99. pic 1.jpg pic 2.jpg pic 3.jpg pic 4.jpg |
Apr 25th, 2017, 14:02 | #6 |
Premier Member
Last Online: Jan 15th, 2024 17:24
Join Date: Jun 2010
Location: Bury St Edmunds
|
Well done!
__________________
Greg |
The Following User Says Thank You to gmonag For This Useful Post: |
Apr 26th, 2017, 18:55 | #7 |
Junior Member
Last Online: Mar 25th, 2018 08:12
Join Date: Dec 2016
Location: Gloucester
|
DvD Player Working Result :-)
Fitted the New Gear Shift Lever and Gaiter today
All Working fine now :-) When I was working there I found lots of wiring that looked like the link to the Rear Monitors and DvD Player in the Glove Box. I was told by the last owner when I brought the Car in December that it had never worked for them, So Playing around with the connections I had a bit of a result :-) :-) See link Below : https://www.youtube.com/watch?v=VzxPrASjID4 Could not be more Happy lol Pete Last edited by Peter Hilsdon; Apr 26th, 2017 at 18:58. |
Apr 26th, 2017, 20:49 | #8 |
Premier Member
Last Online: Jan 15th, 2024 17:24
Join Date: Jun 2010
Location: Bury St Edmunds
|
Bonus result!
__________________
Greg |
The Following 2 Users Say Thank You to gmonag For This Useful Post: |
May 1st, 2019, 17:30 | #9 |
New Member
Last Online: Jun 16th, 2019 13:29
Join Date: Aug 2015
Location: poole
|
Had this issue today. The rod had detached from the button. They are now available separately for £12 on Ebay
__________________
2004 XC90 2.4 SE Auto |
The Following User Says Thank You to Ollyd For This Useful Post: |
Oct 1st, 2020, 14:07 | #10 |
New Member
Last Online: Oct 1st, 2020 14:07
Join Date: Nov 2009
Location: Henley-on-Thames
|
Volvo S60 Geartronic stuck in Drive or Neutral - FIXED
Hi - I used this thread to see if there was a solution to this problem and following it to the end, indeed I could have bought a new gear knob for about £130 or the trigger/button for the knob for £12.99. I bought the latter and a battery charger since keeping the key in ignition obviously drains the battery if it's not disconnected.
The part came from Parts Monster on Ebay and was perfect. The tricky thing is to remove the old trigger/button and replace the new one as there is a spring mechanism which needs to be in place and held whilst the holes for the hinge pin are aligned. I used a piece of wire to keep everything aligned whilst I tried to push the hinge pin through - I also made a small hole at the side of the knob where the pin goes in - probably not the most elegant solution but the only way I could find to do it. Very fiddly but got it done eventually. The rod in the gear shaft then has to be attached to the trigger pin which must go through the hole at the top so that when depressed the shaft moves up and down. When this is in place the knob can be reinserted into position. This fixed the problem and saved hundreds so thanks for those involved in the above thread. |
The Following User Says Thank You to Nige For This Useful Post: |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|