|
S80 '98-'06 / S60 '00-'09 / V70 & XC70 '00-'07 General Forum for the P2-platform S60 / V70 / XC70 / S80 models |
Information |
|
Loose cable harness duct (where to secure)Views : 812 Replies : 5Users Viewing This Thread : |
|
Thread Tools | Display Modes |
|
Apr 28th, 2018, 02:56 | #1 |
New Member
Last Online: Apr 29th, 2018 23:27
Join Date: Apr 2018
Location: New York
|
Loose cable harness duct (where to secure)
Trying to solve a strange noise during highway driving and believe it may be that the ABS Sensor Front cable harness duct is not secured anywhere, hence rattling around.
Part is 31110060, #7 in the attached wiring diagram. https://www.volvoforums.org.uk/attac...1&d=1524879943 The top must snap in somewhere. Other attachments hopefully provide enough to help:
Hope it's an easy answer or someone can look under their hood and send me a picture how to lock it in place. Charlie (New York) |
Apr 28th, 2018, 07:28 | #2 |
Premier Member
Last Online: Mar 20th, 2024 18:26
Join Date: Jan 2016
Location: Cross Country
|
It^s the same on an XC90, the duct just drops and hangs in free air. Close to the engine pulleys!
I tied mine back with a cable tie to ensure it will never hit the engine
__________________
XC90 R-Design MY2009, Black Sapphire Metallic. HP-Sound, RSE, Nav, Tel, ParkingCam, BLIS, ParkingHeater, RestHeat, Removable Towbar, Summer: CRATUS 20x8 on Pirelli Scorpion Zeros 255/45, Winter: NEPTUNE 17x7 on Continental WinterContact 4x4 235/65. |
The Following User Says Thank You to SwissXC90 For This Useful Post: |
Apr 28th, 2018, 11:05 | #3 |
New Member
Last Online: Apr 29th, 2018 23:27
Join Date: Apr 2018
Location: New York
|
Thanks.
My first problem is figuring out where to secure the cable duct at the top. Can you describe (or show) where it attaches at the top? I'll certainly follow-up on your suggestion to tie it off on the bottom. |
Apr 28th, 2018, 11:37 | #4 |
Member
Last Online: Apr 17th, 2023 18:48
Join Date: Dec 2014
Location: Down South
|
Thats Interesting,
I have the same duct floating around in my engine bay near the pulleys ( 2005 S60 2.4D ) I only noticed about three years ago after I had the cam belt replaced and thought that the dealer forgot to secure it somewhere. Cant for the life of me see where it attaches to. |
The Following User Says Thank You to Oil Burner For This Useful Post: |
Apr 29th, 2018, 03:48 | #5 |
New Member
Last Online: Apr 29th, 2018 23:27
Join Date: Apr 2018
Location: New York
|
Believe I found where the duct should snap in. Before and after photos are below. Unfortunately, it is not tight and will come loose first bump or pothole.
Wondering if I can secure with Goop, tape or large ties. Recommendations on how to secure would be appreciated! Also, have I found the right place to secure the top of the rogue cable harness duct? Before photo shows cutout in housing (not sure it's called). https://www.volvoforums.org.uk/attac...1&d=1524969419 After photo has cable harness duct placed in the cutout. https://www.volvoforums.org.uk/attac...1&d=1524969419 Thanks again for anyone who looks and can assist. |
Jan 13th, 2024, 03:43 | #6 |
New Member
Last Online: Apr 13th, 2024 02:34
Join Date: Jan 2024
Location: Post Falls
|
Had this issue today as well. Sorry to revive a dead forum
The plastic piece is not supposed to just hang down. It sits like this. It goes on the support bushing bracket for the cross brace. Inside that end piece there is two dots on either side. There is a hole in that support bracket that lines up with this piece. |
Tags |
abs sensor front, part 31110060 |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|