|
General Volvo and Motoring Discussions This forum is for messages of a general nature about Volvos that are not covered by other forums and other motoring related matters of interest. Users will need to register to post/reply. |
Information |
|
Electrical fault non startViews : 1229 Replies : 7Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Jan 14th, 2022, 14:50 | #1 |
New Member
Last Online: Mar 27th, 2024 16:16
Join Date: Jan 2022
Location: melton mowbray
|
Electrical fault non start
Hi all im trying to fix my xc70 2013 d5. It was driving as normal then stopped the car for 20 mins came back to immobiliser fault, braking fault cant recognise depressing brake pedal to start or gear box park position the car will simply not turn over.
We plugged the car in and have faults in the cem b10a202, b10a206, b10a215, b10ea13, b11d487, u010000, u010100, u012100, u013100, u015100, u023500, u043300 dim u01000, u010100, u012100, u015100, u042268 demu010000, u012100, u040168 pamu010100, u012100, u040286, u041586 pbm p061e67 u01000, u010100, u012100, u015100, u040168 a bit of a list but i see that some are duplicated especially the canbus ones, we cant seem to communicate with the srs module, the car has done a good few miles and was wondering if there are any wiring corrosion hot spots to aim for or could a module be up the swanny? Any thoughts or help would be greatly appreciated. |
Jan 14th, 2022, 18:44 | #2 |
Master Member
Last Online: Apr 24th, 2024 20:45
Join Date: Jun 2017
Location: Chesterfield
|
Hello
Well corrosion at the CEM and connector is well documented for P3 XC70's of that era due to poorly applied windscreen sealant allowing water in....so you could at least check the plug connector on the CEM for corrosion and water ingress by checking under carpets to see if they are soggy underneath.....you have nothing to lose from cleaning and re-seating the connector and see what gives. You have already noted that there is a brake pedal position sensor issue and it could quite possibly be as simple as a faulty pedal switch. HTH |
The Following User Says Thank You to 37 RUBY For This Useful Post: |
Jan 17th, 2022, 17:52 | #3 |
New Member
Last Online: Mar 27th, 2024 16:16
Join Date: Jan 2022
Location: melton mowbray
|
Hi ruby thankyou for your help. Unfortunatly everthing seems dry no signs of water ingress.
Ive had the carpets up , checked all the plugs for corrosion checked the maze of wiring the best i could. Also noticed i cannot lock or unlock the car i am starting to have doubts about the cem. It might have blown within the unit its self. I fitted two new brake sensors to no avail. I cant understand why it wont recognise the vehilce is not in park or the brake pedalis depressed. There must be a comms fault. |
Dec 18th, 2023, 15:55 | #4 | |
New Member
Last Online: Jan 8th, 2024 19:55
Join Date: Dec 2023
Location: Holland
|
Quote:
Any idea what your solution was? I have similar codes |
|
Dec 18th, 2023, 17:01 | #5 |
Premier Member
Last Online: Yesterday 19:42
Join Date: Mar 2017
Location: Manchester
|
check battery voltage it needs to be at least 12.5 if you find any thing less you will struggle .Volvos don't like low voltages a scan with vida would be an advantage as the posted codes don't tell us where the fault lies any diagnostic tool that is connected will draw more current to interrogate the modules making any weak signal worse check earth points and cem plugs .. how old is the battery?
|
Dec 18th, 2023, 18:20 | #6 |
New Member
Last Online: Jan 8th, 2024 19:55
Join Date: Dec 2023
Location: Holland
|
Thanks for response!
Baterry is new/when on computer on charger No start… immobilizer, oncall, power steering, airbag, brake problem, airbag, parking sensors error on display Codes: U101000 U010100 U012100 U15100 U040168 U032700 U016700 B10A202 B10A205 B10A215 B11487 ABS, TCM and SRS module are not readable Checked ABS, ECM, ECU plugs for moisture, nothing found... |
Dec 18th, 2023, 20:25 | #7 |
Premier Member
Last Online: Yesterday 19:42
Join Date: Mar 2017
Location: Manchester
|
have you checked the cem multi pin plugs? cem is not the ecu... a scan with vida will help you track down your problem.
Last edited by Simmy; Dec 18th, 2023 at 20:27. |
Dec 18th, 2023, 21:17 | #8 |
New Member
Last Online: Jan 8th, 2024 19:55
Join Date: Dec 2023
Location: Holland
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|