Bought a Breaker...

[KruJoe]

Thanks Chris, found it.
Tris, this my PAS pump, and what looks like the ECU below it.



It's held on by what looks like little MALE torx bolts, I haven't found a tool to fit, maybe I'll make a tool from an allen bolt tomorrow.
Does that look like your set-up?




Mickaleen, is this pair what you need, each side of the towing eye?



They popped out dead easy, and are in good condition:



I think I've found a price for postage, it's not bad. If you send me 10 euros or whatever that equals, that will cover it. Can you do BACS to a UK bank or is paypal easiest? PM me with your address etc.
Ta!

[darren_eire]

Hi there,

Im looking for the fuel pipe that connects to the fuel rail at the side, i cracked mine today..i might need the rail aswell?
Thanks

[Derry]

If its in a good condition would you be able help me with the Driver side inner Door weather strip (+postage to UK)? Here is a picture of it.

As you can see its not straight which means at times I cannot lower the glass with the button pressed + some force.

[KruJoe]

Where are Tris and Mickaleen?


Darren, I'm mega busy this week, flying out for two months Sat am... if it looks easy tomorrow evening I'll whip those bits off for you, to post Tuesday am. How much do you want to pay? I won't expect much, I just don't know what they're worth...


Derry, I think I took off those strips before I sold the doors so still have them. (I think! I'll check tomorrow.) That one is spare, I need some for my Thai car. There is a knack to removing them without bending - start in the middle and lever up! £7 delivered ok? PM me your address buddy. Can send Tues. You need the inside one right?

[darren_eire]

Probably be 10 quid if that's alright and then ill cover the postage aswell.
Thanks alot

[KruJoe]

That's fine Darren, I'll have a go tomorrow and report back, watch the tread in the evening to see how I go, PM me your address and I'll aim to send it Tuesday to get you back on the road. Cheers.

Mickaleen, your bits are packed and ready, please reply to my previous post if you want 'em!

That'll be it for parts this year then, I'll be back to it in Feb folks...
I need to remove the rear springs, mudflaps and strut top mounts if possible tomorrow too!

[darren_eire]

Thanks alot!
Just so you know this is what I'm after, the pipe with the screw on fitment and the bit that goes into the rail. Here is a picture

[KruJoe]

Thanks Darren, a picture is always good!

[ezposse]

Hi Joe - apologies - been away from PC for few days. Yes looks same as mine. Useful detail on removal of ECU at these links:

http://www.volvoforums.org.uk/showthread.php?t=72655

http://www.matthewsvolvosite.com/for...ic.php?p=46827

Basically you need a E-5 Torx socket (or apparently can be done with 5/32" socket).

Please let me know part number if able to remove.

Many thanks

Tris

[KruJoe]

Hi Tris, thanks for that, I think I found a tiny 1/4" drive socket that may do it, in a box of random ones, it's so old and rusty I can't see the size. I'll have a go this evening, so please check back here tonight to see my progress, (subscribe to watch thread), my last chance to post it is tomorrow morning before I leave the country. What are these worth? Name your price and it's yours!
Cheers - Joe.