|
C30 / S40 & V50 '04-'12 / C70 '06-'13 General Forum for the P1-platform C30 / S40 / V50 / C70 models |
Information |
|
Where is ECM on 2010 V50?Views : 571 Replies : 4Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Mar 19th, 2022, 05:07 | #1 |
Junior Member
Last Online: May 23rd, 2023 22:21
Join Date: Oct 2016
Location: Blue Mts, Aust
|
Where is ECM on 2010 V50?
I have an engine warning light on, and the air-con has stopped blowing cold air. However, the car is running perfectly normally. The error codes are:
ECM-1300 Mass air flow sensor signal too low ECM-4000 Canister purge valve signal too low ECM-6000 A/C relay signal too low ECM-6400 Inlet camshaft reset valve signal missing ECM-130B Mass air flow sensor signal too low So, seems to me to be some sort of electrical connection problem. I have removed the CEM and cleaned all the connections but that didn't help. So I guess the next step is to check the connections on the Engine Control Module (ECM) except I can't find it! Anyone know where it is on this car? Thanks.
__________________
1999 V70 + 2010 V50 2.4i Last edited by ozfiddler; Mar 19th, 2022 at 05:26. |
Mar 19th, 2022, 09:08 | #2 |
Senior Member
Last Online: Apr 29th, 2024 08:31
Join Date: Sep 2017
Location: Berkshire
|
As you have the 2.4i it should be at the front of the engine bay next to the air filter.
__________________
2006 S40 2.4 SE Auto. Ruby Red. 83K Miles Some previous cars include: Jaguar x type: Mazda 6 : Mazda 626: Ford Sierra 2.0: Toyota Celica ST 1600 : Hillman Avenger: Triumph Spitfire: Oh and a Volvo 340 GL 1984 company car from new. |
The Following User Says Thank You to MDS40 For This Useful Post: |
Mar 19th, 2022, 22:17 | #3 |
Junior Member
Last Online: May 23rd, 2023 22:21
Join Date: Oct 2016
Location: Blue Mts, Aust
|
Ah, nice one. Thanks for that. Found it! Now to check the contacts.
I was hoping it wasn't one of those models where it was tucked into the wheel arch.
__________________
1999 V70 + 2010 V50 2.4i |
Mar 20th, 2022, 00:07 | #4 |
Junior Member
Last Online: May 23rd, 2023 22:21
Join Date: Oct 2016
Location: Blue Mts, Aust
|
Well that didn't help either so I am stumped. Maybe the ECM has died?
I can clear the faults but as soon as I start the car the warning light comes on within about 15 seconds. The weird thing is the faults shows at <30% which should mean it is acceptable?
__________________
1999 V70 + 2010 V50 2.4i |
May 4th, 2022, 04:26 | #5 |
Junior Member
Last Online: May 23rd, 2023 22:21
Join Date: Oct 2016
Location: Blue Mts, Aust
|
If anyone else has a similar problem the answer was very simple. A blown fuse!
This was actually the first thing that occurred to me, and I checked all the fuses in the usual places. It turns out there are some engine management fuses near the A/C relay (I think he said it was under the wheel arch). One of these had blown causing all the error codes.
__________________
1999 V70 + 2010 V50 2.4i |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|