|
Information |
|
'97 V90 CD with LPG - breaking.Views : 3138 Replies : 30Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Feb 18th, 2012, 01:22 | #21 |
Premier Member
Last Online: Feb 22nd, 2024 10:32
Join Date: Jan 2010
Location: Silloth near Carlisle, Cumbria
|
Load Cover PLEASE!!!!
Let me know when convenient to pick up, can do pretty much any time to suit you. regards
__________________
Graeme 2007 XC90 SE 1998 940 Celebration |
Feb 19th, 2012, 13:35 | #22 |
Premier Member
Last Online: Feb 22nd, 2024 10:32
Join Date: Jan 2010
Location: Silloth near Carlisle, Cumbria
|
Many Many thanks for all your help today Rupert, top man.
Thank you
__________________
Graeme 2007 XC90 SE 1998 940 Celebration |
Feb 19th, 2012, 14:22 | #23 |
N.F.I
|
No problem Graeme, nice to meet you and I hope you got back with no further problems.
Right, well the load cover has now sold, but I have noticed that I did actually keep a couple of other things so I also have; Both front foglights - £20 for the pair. Drivers side rear light cluster, good condition - £10 |
Feb 21st, 2012, 19:13 | #24 |
Junior Member
Last Online: May 26th, 2014 16:15
Join Date: Feb 2009
Location: chichester
|
did u sell the LPG system?
|
Feb 22nd, 2012, 22:39 | #25 |
New Member
Last Online: Sep 12th, 2017 17:16
Join Date: Jun 2011
Location: Dumfries
|
Is the front bumper still available?
|
Feb 23rd, 2012, 18:49 | #26 |
N.F.I
|
The front bumper has gone with the car I'm afraid.
The LPG kit is provisionally sold, but should the prospective buyer drop out you're first in line! |
Feb 23rd, 2012, 20:46 | #27 |
New Member
Last Online: Jun 17th, 2013 14:12
Join Date: Feb 2012
Location: Santa Rosa, CA
|
Put me second in line for the LPG kit then.
|
Mar 6th, 2012, 00:04 | #28 |
Senior Member
Last Online: Apr 29th, 2019 01:30
Join Date: Nov 2010
Location: Glasgow
|
I'm very interested in the LPG kit if it was still available. Is it already out the car?
I'm also looking for the large curved rubber air intake pipe that connects to the throttle body.... also with the black plastic breather connector if possible. |
Mar 6th, 2012, 08:38 | #29 |
Master Member
Last Online: Apr 14th, 2020 21:20
Join Date: May 2010
Location: chesham
|
|
Mar 6th, 2012, 21:30 | #30 |
N.F.I
|
Yes, the LPG system has now been removed from the car and the current buyer has pulled out so it is available again.
Following advice from various people wiser in the ways of LPG than I I have NOT kept the gas lines that run from the tank to the engine bay, nor the wiring that actuate the solenoid valve on the tank. Apparently these are not recommended to be transferred from vehicle to vehicle and any bone fide LPG installer would not certify the car if they were re-used.. So, to recap, there's a 50l donut tank (with some gas in it, maybe 15-20l) complete with filler valve and pipe, solenoid and safety valve, evaporator and coolant hoses/T pieces, distribution valves, 6 injectors and gas lines, wiring loom with changeover switch and ECU mapped for a B6304. All that needs to be done is run a + and - wire from the connector in the loom to the solenoid valve of the tank, and run a gas line (copper pipe) from the solenoid valve up to the evaporator. You'll also need to drill and tap 6 holes in the inlet manifold for the injectors, swap the coolant hoses over to allow for coolant to reach the evaporator, and find a + and - feed for the whole system. Price is now reduced to £250 to account for the missing wires/pipes. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|