|
Information |
|
Looking to buy a diesel V40Views : 1292 Replies : 3Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Feb 16th, 2022, 23:06 | #1 |
New Member
Last Online: May 23rd, 2022 22:58
Join Date: Nov 2017
Location: Dungannon
|
Looking to buy a diesel V40
Hi all
I am looking to buy a V40, but on the fence about what engine to get. I have come from a long line of french cars, 406 2.0 HDi was old faithful for 10 years and then i drove a Berlingo 1.6 8v HDi until very recently when it got wrote off. What has drawn me to the V40 was it has the same DV6 engine as my berlingo, an engine im fairly familiar with in the french applications having done many a timing belt and service in Berlingo, 307, 308, C4 etc. I generally consider them to be reliable if serviced. However i see threads over here in volvo land discussing cracked blocks. How common a problem is a cracked block on a D2 engine? Is it just the usual forum thing of problems getting complained about more than good cars? Did volvo do anything different to this engine to make it at risk of cracking the block. My thoughts on the other engines. The 5 pot D3/D4 would tempt me, but i can just as easily start searching through forums to see threads of cracked blocks for that engine, and im after something more for economy than out and out power. The VED 2.0 4 pot engine is in much fresher cars out of my budget, and i suppose hard to know yet how reliable they are as they age. |
Feb 16th, 2022, 23:24 | #2 |
Bungling Amateur
Last Online: Today 07:40
Join Date: Aug 2014
Location: Beverley, East Yorks
|
In the pre 2015 model year D2 cars it’s the same 4 pot 1.6 diesel as the Citroens, Peugeots also BMW Mini, some Fords etc. and looked after properly you can expect it to be reliable.
The majority of V40 models of those years had this engine as it was the cheapest diesel and lowest running costs - consequently it’s the one most likely to be bought by people on a budget who may scrimp maintenance and the one you’re most likely to read about as there is so many more of them in use. The real issue is the Volvo engines set a very high bar in terms of longevity and reliability so in comparison the 1.6 looks bad even though it’s not. A well maintained 1.6d should make 180k +. I don’t think anyone has ever worn out a D3/D4 Engine in a V40…. The 1.6 d used to get complimented by the motoring press but the Volvo engines are superb and suit the car so well, I prefer the Volvo gearbox also. Cracked blocks are virtually unheard of, it’s not something you should worry about.
__________________
2011 XC90 D5 Executive 2003 C70 T5 GT 2012 Ford Ranger XL SC 1977 Triumph Spitfire 1500 1976 Massey Ferguson 135 Last edited by Tannaton; Feb 16th, 2022 at 23:26. |
The Following User Says Thank You to Tannaton For This Useful Post: |
Feb 17th, 2022, 11:52 | #3 |
Premier Member
Last Online: Jan 15th, 2024 17:24
Join Date: Jun 2010
Location: Bury St Edmunds
|
The engine is not the issue but the D2 gearbox is a Ford unit, using dry clutches. The D3/D4 have a conventional torque converter. Test drive to make your own opinion.
(Spoiler - I did, and rejected the D2. I bought a D3)
__________________
Greg |
Feb 17th, 2022, 14:02 | #4 | |
Bungling Amateur
Last Online: Today 07:40
Join Date: Aug 2014
Location: Beverley, East Yorks
|
Quote:
The D2 Auto (powershift) is a Ford "DSG alike" unit and you do hear of problems, often due to lack of oil changes. The D2 manual has a Ford MMT gearbox which is okay. The D3/D4 have the Volvo M66 which is superb....
__________________
2011 XC90 D5 Executive 2003 C70 T5 GT 2012 Ford Ranger XL SC 1977 Triumph Spitfire 1500 1976 Massey Ferguson 135 |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|