|
S40 / V40 '96-'04 General Forum for the Volvo S40 and V40 (Classic) Series from 1995-2004. |
Information |
|
OBD2 CompliantViews : 4719 Replies : 16Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Aug 16th, 2009, 07:36 | #1 |
Junior Member
Last Online: Sep 20th, 2020 07:51
Join Date: Aug 2009
Location: Battersea London
|
OBD2 Compliant
hi all
New to the forum. Can anyone tell me if my car would be OBD2 Compliant ? As i have seen a diagnostic reader on ebay, but it says the car must be OBD2 compliant? My car is a S40 t4 1998 year Any info ? |
Aug 16th, 2009, 11:28 | #2 |
Junior Member
Last Online: Sep 14th, 2014 10:57
Join Date: Jun 2009
Location: manchester
|
Fro earlier posts it seems that phase 1 cars are not compliant despite having the connector. I'd search this forum as I recall someone linking to some software that will work. IIRC it's £100+ though :-( The connector is the same I believe.
|
Aug 16th, 2009, 13:31 | #3 |
Master Member
Last Online: Dec 29th, 2013 22:39
Join Date: Dec 2003
Location: Ashford
|
It might be as it has the Seimens EMS2000 ecu. There has been someone on here with a 98T4 that was compliant but I dont know if that means they all will be, it could be the ecu was only made compliant from that year onwards. The non turbos werent compliant until alot later.
|
Aug 16th, 2009, 20:01 | #4 |
Premier Member
Last Online: Dec 28th, 2022 12:25
Join Date: Jun 2009
Location: Mercville
|
........be careful what one you get as i have had a couple one was £60 and would not do what was stated as it was the older model.....sellers just want to sell there back lot of old scanners..........i settled for the U480 scanner from eBay i think about £25.....it tells you the codes and will also erase them.....there are other functions as well and it comes complete with a book containing about 1000 codes, does not need batteries either.......my `98 V40 T4 is compliant, as "Dandle" says it has the Seimens EMS 2000 ecu, it was registered 30th December 1998, but i think they stopped producing them in Sep. `98
__________________
Mercedes C320CDI Sport Estate 3 litre V6 7 Gear Auto Remap 290bhp 628Nm torque @ 1600revs 45.1mpg |
Aug 16th, 2009, 23:59 | #5 |
Master Member
Last Online: Dec 29th, 2013 22:39
Join Date: Dec 2003
Location: Ashford
|
The seimens EMS 2000 ECU was used right up until the end of production of the S40, it was used on all turbo cars from 98(and maybe before i dont know) and then alot of the N/A cars used it when they had to become OBD2 compliant in 2001.
|
Aug 17th, 2009, 08:05 | #6 |
Premier Member
Last Online: Dec 28th, 2022 12:25
Join Date: Jun 2009
Location: Mercville
|
.........what i meant was the production of the T4 1855 Phase 1 stopped production in Sep. 1998 and not the ECU!!.........my post should be read as a whole and not part of or "edited".....
__________________
Mercedes C320CDI Sport Estate 3 litre V6 7 Gear Auto Remap 290bhp 628Nm torque @ 1600revs 45.1mpg |
Aug 17th, 2009, 10:04 | #7 |
Master Member
Last Online: Dec 29th, 2013 22:39
Join Date: Dec 2003
Location: Ashford
|
Ok my bad it didn't read like that to me, sorry. The phase 1 T4 didn't stop production that year though, My T4 was made in sep99 and I'm pretty sure they were made right up until the phase 2 cars came out in 2000/2001 when they got the larger engine.
|
Aug 17th, 2009, 10:06 | #8 |
Senior Member
Last Online: Jun 21st, 2022 13:33
Join Date: Sep 2006
Location: Lausanne
|
EMS 2000 (all petrol turbo + phase2 N/A) is OBD2 compliant. Siemens Fenix 5.1 (phase 1 N/A) is NOT OBD2 compliant.
|
Aug 17th, 2009, 17:32 | #9 |
Premier Member
Last Online: Dec 28th, 2022 12:25
Join Date: Jun 2009
Location: Mercville
|
......i have just read that somewhere about the cease of production for the T4 1855 Phase 1.....don`t laugh but i now have got to try and remember where i read it!!.......i`ll be back ...probably with a sorry note!!........
__________________
Mercedes C320CDI Sport Estate 3 litre V6 7 Gear Auto Remap 290bhp 628Nm torque @ 1600revs 45.1mpg |
Aug 17th, 2009, 19:50 | #10 |
Premier Member
Last Online: Dec 28th, 2022 12:25
Join Date: Jun 2009
Location: Mercville
|
.........well here i am , and yes a sorry note , i have just read elsewhere the phase 1 ceased production in March 2000........what i read before they must have it wrong........also what was interesting if a model was produced in 2000 the date of manufacture was given by volvo as 2001???.......
__________________
Mercedes C320CDI Sport Estate 3 litre V6 7 Gear Auto Remap 290bhp 628Nm torque @ 1600revs 45.1mpg |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|