|
AWD Discussion A forum dedicated to the AWD systems fitted to Volvo cars. |
Information |
|
Haldex oil changeViews : 48744 Replies : 58Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Jun 13th, 2019, 14:07 | #1 |
Member
Last Online: Aug 2nd, 2023 09:06
Join Date: Dec 2008
Location: Warrington
|
Haldex oil change
I'm new to AWD, my 2016 XC70 D5 geartronic AWD is my first AWD car of any make. but not my first Volvo
I tend to keep my cars a long time and to do this successfully I'm fastidious about running on clean oil / fluids. Is there a recommended time / mileage to service the Haldex ? Any idea what it costs at a good indi ? |
Jun 18th, 2019, 05:56 | #2 |
New Member
Last Online: Sep 15th, 2020 09:18
Join Date: Jul 2018
Location: Leven
|
Frank,
Ive just done mine myself on my XC60 D5 (2014). Not sure if yours will have same unit. But I was £44.00 for the oil and took about 1.5hrs to complete. Most of that time was cleaning the parts when off the car. So I'd guess an independent should be less than £150 ? |
Jul 12th, 2019, 10:55 | #3 |
John
Last Online: Aug 3rd, 2023 18:34
Join Date: Mar 2017
Location: Llanrhaeadr ym Mochnant
|
Hi Frank. I have a 2009 XC90 that I plan to keep for a while yet; mileage now 208,000. I was hearing faint bearing noises from the rear. I had used the local dealer up to now. They pronounced that I needed a new Haldex unit; that'll be £3,400+ thank you! No Thank You!
I have finally found an experienced local independent whose philosophy is repair where possible. He had a careful listen with a stethoscope and said that the noise was from the differential. This has proved to be so, and the old differential fell apart when he was getting the gears out, suggesting a hairline crack that might have gone any time. The Haldex unit was fine, and he changed the oil and filter. Anyway, the point of the post is that he says that Volvo have no schedule for servicing Haldex units. He says this is crazy as the oil gets dirty over time and loses efficiency. He says that the Haldex units should be serviced every 50,000 miles, with a filter and oil change. This makes a lot of sense. Regards, John |
The Following 5 Users Say Thank You to johncrwales For This Useful Post: |
Aug 10th, 2019, 20:23 | #5 |
Junior Member
Last Online: Nov 5th, 2022 15:17
Join Date: Dec 2008
Location: Towcester
|
Haldex Filters and Oil
Hi
The Haldex unit needs to be serviced on a regular basis. I think that later Volvo`s use the Haldex Gen V5 and there is no filter therefore requires a more frequent service about 12 to 15k. Its quite easy on this model as there is no filter just undo the pump and let the oil drain out, there is a small plastic gauze that needs to be cleaned. On older models they have the Haldex Gen V4 this does have a filter and it is a little harder to remove the haldex pump,it also requires a new filter.The service can be left a little longer about every 40k but care is needed when refilling the Haldex as about 70ml needs to be removed after filling. If you use your car for heavier work such as caravan towing the Haldex works harder. This is only my opinion about Haldex but I believe prevention is better that cure. There is also a good video on youtube that clearly shows both the 4 & 5 being serviced. There is a guy in Kidderminster who offers a drive in Haldex service for £180 including VAT. Richard |
The Following 2 Users Say Thank You to richard willetts For This Useful Post: |
Aug 19th, 2019, 19:04 | #6 |
Senior Member
Last Online: Mar 17th, 2024 10:03
Join Date: Sep 2010
Location: Grantham
|
I too am all about preventative maintenance and so this sounds like good sense. I'm guessing my late 2010 XC90 (2011MY) has a Gen 4 coupling.
My local main dealer said this: The Haldex coupling is a non service item however the oil can be replaced and the gauze filter cleaned for £226. I believe many VAG models have the same coupling with service intervals between 20k and 40k miles. What's the deal with Volvo and the huge bill for a little oil and some labour? Is it the case that the design of the car makes the coupling a bitch to get at and most of the labour is for taking things apart to get to it? I may ask my indie what he thinks. BTW whilst I was asking about Haldex I thought I would enquiry about an ATF flush and replace. That was even worse at £442. |
Aug 20th, 2019, 10:00 | #7 | |
Premier Member
Last Online: Jun 3rd, 2024 10:51
Join Date: May 2018
Location: Na
|
Quote:
I wish to change the oil and filter both of which were not expensive at around £50 from Volvo. I think the issue is getting the prop shaft off and removing the assembly etc. Having changed the cambelt, water pump etc myself the idea of doing the haldex unit looks complex to me..... |
|
Aug 21st, 2019, 22:26 | #8 | |
Premier Member
Last Online: Oct 11th, 2024 13:44
Join Date: Aug 2008
Location: Newcastle
|
Quote:
Oil replacement again on mine was very simple via a single access point, sucked out with a "mitty" or similar or just a long thin plastic pipe. NB blow through the pipe before withdrawing the old oil to disturb as much sediment in the haldex unit as possible. After refilling ( I used a meter+ long pipe and filled via a funnel at the NS door) to the level of the hole I withdrew 100ml as I had read about issues if you did not. If you have done a cambelt change you can do this. I started but failed due to seized filter bolts, and a cambelt change scares me. Cheers Bob |
|
The Following User Says Thank You to 100K+ For This Useful Post: |
Oct 21st, 2019, 20:28 | #9 |
Junior Member
Last Online: Mar 29th, 2020 11:24
Join Date: Aug 2018
Location: Shrophire
|
Afternoon,
I looked many time in Vida and no info about the haldex maintenance. No info at all about it. I like to think oil need to be changed to have a longer components life. I changed the oil on mine S80 AWD. I was surprise au clean the oil was (74K). I guess it was done before (maybe not as the AWD was not working). You need to remove the propshaft bearing carrier and then the disconnect it from the haldex unit flange. After you need to remove the flange (depend if you have enough space to remove the pump).After that you can access the pump. Changing the filter is really easy. However remove the pump was really hard. The pump was litteraly welded ! I changed the pump seals (cheap oring seal when you know the size with VIDA). Installation is not to bad. You need a tool to hold the flange when you torque the nut (150Nm). You neeed some good tool and extension as the CV joint bolt on the top can be difficult to access and torque. Hope this help. |
The Following 2 Users Say Thank You to Scalix For This Useful Post: |
Nov 23rd, 2019, 13:10 | #10 |
from C30 to XC60
Last Online: Aug 28th, 2023 07:55
Join Date: Jul 2012
Location: Braintree, Essex
|
Mine was changed this morning haldex 5 - 2015 xc60.
See before and after pics - this is the first time I've changed it after 73k miles... despite asking Volvo directly and the dealer if it needed to be done - they both said it doesn't.....I think these images show otherwise! |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|