|
S40 / V40 '96-'04 General Forum for the Volvo S40 and V40 (Classic) Series from 1995-2004. |
Information |
|
Guide: Fitting LED's to side lights and yellow side lightsViews : 36804 Replies : 151Users Viewing This Thread : |
|
Thread Tools | Display Modes |
May 6th, 2011, 15:18 | #1 |
Master Member
Last Online: Dec 30th, 2018 08:33
Join Date: Oct 2010
Location: Craigavon area
|
Guide: Fitting LED's to side lights and yellow side lights
This should work on most volvo cars, this will work on x40 series cars.
Thanks hyvää for link and information about those LED's. I will make this as a guide so if anybody else wants to change to LED's(or regular light bulbs) they can do so faster and easier than they could do that themselves, saving some time and money. So then, typical warning. I am not a electrician! I do not take any responsibility if you mess this up and short circuit car's electrical system! (this doesn't stop you/me from rewiring your/my house with new electric cables, and change lighbulbs your/my self ) I made some comparison for a side lights. It looks way better than original(urine) colour bulbs Looks way better than originals eh? So then..... Light bulbs came from Hong Kong, it took nearly 2 and half weeks to get them, I ordered 3 of them( there is 2 LED bulbs in one pack, in total I've got 6 LED's) Unpacking... Comparing light bulb with LED's -------- I used small flat head screwdriver, you may want to use something between screwdriver and plastic, just in case of any damage occurs. ( I didn't used any) Move it outwards, that metallic clip holds it in place so you just want to pop it out(if it is rusty, it will fells like its stuck) Slide it towards the back of the car Check if there is any damage to wires To remove the light bulb holder you need to rotate it 90 degrees counter clockwise (pret pulksteni) It should come out easy enough Then remove light bulb. If metal has oxidised, you might have some problems to remove light bulb itself(just pull it out, do not twist the bulb or holder) You might want to use something like this after you remove light bulb and if you notice that there is some oxidation marks, remove them with flat head screwdriver and then use electric contact cleaner and let the fluid rinse out( put housing upside down) do this few times and only then insert your new LED's or normal light bulbs Some of the bulbs were really bad.. only 1 of 4 bulbs were working... There is some thing that you should do with new LED's before you fit them... When you receive them, metal connectors looks like in pictures bellow... they are too close together... so you need to make some adjustments first, move those wires more to the sides so they do connect to the metal directly(If you don't do this LED's might not work) then use screwdriver to bend those tiny wires back from the housing Then, when you fit old bulb with LED note that if you insert them and they are not working, rotate LED 180 degrees, they should work(looks like they only work one way) Then insert them back in indicator housing and install them back in the bumpers, NOTE that LED housing can be inserted only one way, just align pins on each sides of the housing so that they match grooves on yellow side light housing. Good thing that those LED's fits in side light sockets(I believe they are called) as well. Locate wires at the bottom and pull them out. Replace with LED's put them back in and you are good to go Nice!!!!!!! I have heard that the same type fits into other places as well, other forum members feel free to correct me or add more information about them or post some links where forum members or unregistered readers could get them Last edited by Biotoxic; May 6th, 2011 at 15:27. Reason: Name change |
The Following 21 Users Say Thank You to Biotoxic For This Useful Post: |
May 6th, 2011, 19:31 | #2 |
VOC Member
Last Online: Feb 26th, 2024 20:12
Join Date: Jan 2011
Location: Montrose
|
Side markers
Hi biotoxic
I bought some of the shorter, 8 x SMD LED 501's, from Honk Kong a few months ago. They fitted the front sidelights, but they appeared to be just too long to fit into the side markers, as they touched the inside of the lens before the bulb mounting could be re-connected. Your bulbs are 12 x SMD's, so I assume they are longer than the ones I had. Did they have to be forced into the lens unit, or did they go in with no problem? I had to order a different style of LED to fit into mine. I have a 2003 S40. Gary
__________________
Current car: 2002 V70 2.4T SE Mod's so far: Orpheus alloys, 10.1" android multimedia head unit, Nappa leather rebuilt, wood trimmed m/function steering wheel, Polestar blue and black calipers, Pipe Dynamics custom turbo back stainless steel exhaust, with 200 cell sports cat, R engine and injector rail covers, tinted rear windows. Previous cars: 1982 760 GLE saloon 1989 740 GLE estate 1991 440 S 2003 S40 S - Gone but not forgotten. ☹ 16 non Volvos. |
May 6th, 2011, 19:47 | #3 |
Master Member
Last Online: Nov 13th, 2020 06:29
Join Date: Mar 2010
Location: The Land of Ice & Snow
|
Excellent guide Bio! Glad I could help on the bulbs
I have these in numberplate, sidelights, front and rear interior lights aswell. They are all the same fitment. Rear interior lights are a snug fit but they do work And your right! They are much better than urine coloured lamps. Here is interior light with same bulbs: IMG_0142.jpg
__________________
Last edited by Volvon; May 6th, 2011 at 19:56. |
May 6th, 2011, 20:06 | #4 |
Master Member
Last Online: Sep 16th, 2022 16:46
Join Date: Mar 2008
Location: Cupar fife
|
can i ask what the model no. of bulb is or where i could find them look crackin and easy to fit!
many thanks dave
__________________
volvo s40 2001 t4 manual |
May 6th, 2011, 20:27 | #5 |
Premier Member
Last Online: Oct 11th, 2012 08:49
Join Date: Jun 2010
Location: manchester
|
Carnt see the pictures
__________________
I said a 10 second car not a 10 minute car Chipped and rolling roaded at 221.9 hp at std boost Horns relocated for better air flow with a Horn from a Vag,Coil overs fitted |
The Following User Says Thank You to T4Rick For This Useful Post: |
May 6th, 2011, 20:30 | #6 |
Premier Member
Last Online: Oct 11th, 2012 08:49
Join Date: Jun 2010
Location: manchester
|
I can see them now lol
__________________
I said a 10 second car not a 10 minute car Chipped and rolling roaded at 221.9 hp at std boost Horns relocated for better air flow with a Horn from a Vag,Coil overs fitted |
May 6th, 2011, 20:42 | #7 |
Premier Member
Last Online: Jun 12th, 2024 18:17
Join Date: Aug 2009
Location: birmingham
|
swapping the interior bulbs to LED does however loose the "soft start/stop" that filament bulbs give.
on a S40 , LED "bulbs" for the rear number plate lights make a LOT of sense. Fit and forget.
__________________
940s - 2l / 92 < gone&missed s401.8 xs auto <gone >V50 2.4SE Geartronic aka "the new money pit" "skyship007 has now been successfully added to your ignore list. "." |
May 6th, 2011, 20:51 | #8 |
Master Member
Last Online: Nov 13th, 2020 06:29
Join Date: Mar 2010
Location: The Land of Ice & Snow
|
Yep Andy, especially as my numberplate lights had all but melted...along with old H4 headlight connector..headlight switch bulb..
You would think Volvo had been making cars long enough to realise not to put bulbs in that melt things..
__________________
|
May 6th, 2011, 21:12 | #9 |
Master Member
|
Hi there,
I've converted my side markers, sidelights and all interior to led. I haven't lost my soft start and fade on interior though. Cheers, Daniel |
May 6th, 2011, 22:03 | #10 | |
Premier Member
Last Online: Jun 12th, 2024 18:17
Join Date: Aug 2009
Location: birmingham
|
Quote:
dan, i tried 34SMD led panels in mine, front + rear Very white light ,very nice, but on/off so went back to normal bulbs, but the rest, foot well/boot/glovebox all went to LED of one sort or the other, Side lights / marker lights are "next"
__________________
940s - 2l / 92 < gone&missed s401.8 xs auto <gone >V50 2.4SE Geartronic aka "the new money pit" "skyship007 has now been successfully added to your ignore list. "." |
|
Tags |
fire impending doom, how to, led, leds, light bulbs, side light |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|