|
S80 '98-'06 / S60 '00-'09 / V70 & XC70 '00-'07 General Forum for the P2-platform S60 / V70 / XC70 / S80 models |
Information |
|
Anti-skid service requiredViews : 3558 Replies : 39Users Viewing This Thread : |
|
Thread Tools | Display Modes |
|
Dec 19th, 2020, 10:05 | #1 |
Junior Member
Last Online: Nov 5th, 2023 09:52
Join Date: Feb 2019
Location: Derry
|
Anti-skid service required
Hi all. I've had this error intermittently for a while now. Its since become a permenant feature on the dash. Any suggestions on where I should start digging? Would a live data stream of the 4 speed sensors show the offending corner? Thanks
05 s60 d5 |
Dec 19th, 2020, 10:23 | #2 |
Senior Member
Last Online: Today 12:20
Join Date: May 2019
Location: Winchester
|
Yes, you could check the data from the sensors
A visual check of the reluctor rings at the front for rust/damage A check on the tightness of the driveshaft bolts (behind the Volvo centre cap) are a few things you could do
__________________
V70 P2 2006 2.4 Petrol 170bhp Est SE Automatic (5 speed) MG Midget Mk1 1962 Previous: RR TDV8 3.6 '08; RR TD6 3.0 '02; RR P38A V8 '99; Audi A4 Cab 3.0 V6 2004; Volvo 740 GLE Est 1989 Have VIDA & VXDIAG NANO on W10Pro - happy to help |
Dec 19th, 2020, 12:27 | #3 |
Junior Member
Last Online: Nov 5th, 2023 09:52
Join Date: Feb 2019
Location: Derry
|
Thanks. I'll make sure the axle bolts are snug then check the readouts. Not looking forward to dropping a leg over christmas but the lack of TC is not an option in this weather.
|
Dec 19th, 2020, 13:15 | #4 |
Junior Member
Last Online: Nov 5th, 2023 09:52
Join Date: Feb 2019
Location: Derry
|
Ok so all the speed sensors are ok but I'm getting ABS0130 brake sensor 1 too low. The live readout on both pressure sensors puts 1 at 16 bar and 2 at -0.7 bar with no pressure on pedal, with pressure applied they both ramp up but the same difference between them exists.
Are these readings normal? Anyone chased this problem before? And does anyone know where the sensors live? ABS seems to be working fine btw. Thanks |
Dec 19th, 2020, 14:08 | #5 |
Senior Member
Last Online: Mar 29th, 2021 13:49
Join Date: May 2019
Location: Near Munich
|
Isn't it BCM-0130? With what are you reading your codes?
Assuming it's BCM-0130 the plugs for the sensors are interchangable. Try and see if the error is moving to the other sensor. If so, it's not the sensor. More likely, I'd suspect corroded plugs, the sensors are not specifically know for breaking down.
__________________
Volvo XC90 D5 AWD Summum MY05 Harley-Davidson Ultra Classic Electra Glide MY91 FLHTCU |
Dec 19th, 2020, 14:25 | #6 | |
Junior Member
Last Online: Nov 5th, 2023 09:52
Join Date: Feb 2019
Location: Derry
|
Quote:
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|