wiper woes..you know when you start one job and .. - Page 2

honestjoe · Mar 5th, 2021, 10:28

Well i went out this norning and looked at the offending article..I thought.. if i drink enough bishops finger it might just fix itself!..dont tell girlfriend!

morwenna240 · Mar 11th, 2021, 17:37

This is what i did: remove wire connection plug from wiper motor, figure out which is positive. take two wires from batt, touch to wiper connections until blades in desired position at bottom of screen, et voila! Reconnect plug. The timing stays same, controlled-by-something-somewhere-else!

honestjoe · Mar 16th, 2021, 12:58

Thanks for that morwenna240..I wish i had of tried that..what i did in the end was..I slightly bent the lower contact in the gear box to allow the sweep to continue before cam breaks circuit..not perfect but very close..I"m glad you told me this..it was driving me crazy as to how the timing changed..Much obliged..hj...ps the something somewhere else could be the relay?

Mar 16th, 2021, 12:58	#13
honestjoe MY 240 DRIVES ME! Last Online: Yesterday 07:41 Join Date: Jan 2007 Location: ashford kent View Photos By: honestjoe	Thanks for that morwenna240..I wish i had of tried that..what i did in the end was..I slightly bent the lower contact in the gear box to allow the sweep to continue before cam breaks circuit..not perfect but very close..I"m glad you told me this..it was driving me crazy as to how the timing changed..Much obliged..hj...ps the something somewhere else could be the relay? Last edited by honestjoe; Mar 16th, 2021 at 13:00. Reason: The penny is starting to drop!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Mar 5th, 2021, 10:28	#11
honestjoe MY 240 DRIVES ME! Last Online: Yesterday 07:41 Join Date: Jan 2007 Location: ashford kent View Photos By: honestjoe	Well i went out this norning and looked at the offending article..I thought.. if i drink enough bishops finger it might just fix itself!..dont tell girlfriend!

Mar 11th, 2021, 17:37	#12
morwenna240 Senior Member Last Online: Mar 23rd, 2024 19:59 Join Date: Sep 2019 Location: heptonstall	This is what i did: remove wire connection plug from wiper motor, figure out which is positive. take two wires from batt, touch to wiper connections until blades in desired position at bottom of screen, et voila! Reconnect plug. The timing stays same, controlled-by-something-somewhere-else!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)