|
Information |
|
Continental ContiCrossContact UHP tyresViews : 1276 Replies : 1Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Dec 5th, 2010, 21:06 | #1 |
Petrolhead+Lots of Diesel
Last Online: Today 16:01
Join Date: Aug 2008
Location: Glasgow
|
Continental ContiCrossContact UHP tyres
Well I have changed the tyres on the tank, for Nokian WR G2's .... thanks Pneus-online ... still very grumpy with MyTyres.co.uk though after the previously posted nonsence.
So new tyres, why? ... because I trashed one with a puncture (2nd one in 18mths ) and I didnt fancy having one half worn tyre and one new tyre on the same axle, so new tyres purchased I now have 3 part worn Conti's for sale. Details below, not much to say ... they were factory supplied from new with my XC90, they have done approx 12000 miles and I've given the tread depth at 3 points across the tyre measured with a manual sliding depth guage. The tyres have NO CUTS, NO BULGES, NO PUNCTURES and NO KERBING/RASH Continental ContiCrossContact UHP tyres size - 235/60 R18 103V Tyre 1: Inside 5.5mm Centre 5.0mm Outside 5.0mm date code 2208 Tyre 2: Inside 5.0mm Centre 5.0mm Outside 4.5mm date code 2208 Tyre 3: Inside 5.0mm Centre 5.5mm Outside 5.0mm date code 4108 Note: This tyre was replaced at 6 weeks old due to a puncture To be honest I dont think the conti's are that bad a tyre ... they coped very well with last years snow and ice and are fairly quiet, so if your looking for a good part worn tyre drop me a PM and make me a sensable offer on one, two or all three, best if you come and have a look, I'm on the southside of Glasgow. Cheers Robin
__________________
BMW X3 Msport MHEV 2020MY & VW Beetle Design 1.2Tsi DSG 2014MY Previous XC90 D5 SELux Geartronic 2009MY |
Dec 16th, 2010, 10:23 | #2 |
Petrolhead+Lots of Diesel
Last Online: Today 16:01
Join Date: Aug 2008
Location: Glasgow
|
All gone.
__________________
BMW X3 Msport MHEV 2020MY & VW Beetle Design 1.2Tsi DSG 2014MY Previous XC90 D5 SELux Geartronic 2009MY |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|