Cruise control

Dec 1st, 2003, 15:59

My cruise control on my 850 t5 does not work

Previous posts have suggested checking under the battery to see if there are any loose pipe connections

as the cruise control is not detailed in the haynes manual does anyone have diagrams or photos showing what it should look like and where the connections go so i can see if i can find the fault

thanks

Matthew Fox

1995 volvo 850 t5
1971 triumph spitfire

sholtby · Dec 1st, 2003, 17:10

There are switches on the brake and clutch pedals that cancel the cruise control. You may want to check them with a mulitmeter.

Simon

NugentS · Dec 4th, 2003, 19:38

Mine used to cut out on a regular basis. Do you have an OBD2 connector, in which case the Cruise Control will generate error codes - but these aren't stored so you have to take it to a garage after its failed and do not trun the engine off.

Mine ended up being the vacuum pump had failed.

Sean

Dec 1st, 2003, 15:59	#1
matthewfox Guest Location:	Cruise control My cruise control on my 850 t5 does not work Previous posts have suggested checking under the battery to see if there are any loose pipe connections as the cruise control is not detailed in the haynes manual does anyone have diagrams or photos showing what it should look like and where the connections go so i can see if i can find the fault thanks Matthew Fox 1995 volvo 850 t5 1971 triumph spitfire

Dec 1st, 2003, 17:10	#2
sholtby Premier Member Last Online: May 26th, 2010 20:17 Join Date: Dec 2002 Location: north east	RE: Cruise control There are switches on the brake and clutch pedals that cancel the cruise control. You may want to check them with a mulitmeter. Simon

Dec 4th, 2003, 19:38	#3
NugentS Me Last Online: Oct 29th, 2020 11:41 Join Date: Dec 2002 Location: Somewhere in the UK	RE: Cruise control Mine used to cut out on a regular basis. Do you have an OBD2 connector, in which case the Cruise Control will generate error codes - but these aren't stored so you have to take it to a garage after its failed and do not trun the engine off. Mine ended up being the vacuum pump had failed. Sean

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)