2319 v 2435

PNuT · Nov 15th, 2006, 18:02

just out of interest

if you were planning to tune both of the above engines which one would be a better starting point?

SIAMBLUE · Nov 15th, 2006, 18:57

The latter if you could get one, but you would not want a early 2319, the later ones 99 are the strongest, and have the green injectors on the R,

Rooster · Nov 15th, 2006, 19:02

I'd get a later spec 2319 lump and use that as the 2435's have thinner bore walls and i've seen a couple that have cracked altho not on R's but on the cross country AWD's

PNuT · Nov 15th, 2006, 20:19

so it gets confusing? my question was kind of aimed at if you wanted to upgrade turbo chip & exaust

are the walls too thin on a 2435 lpt engine too seriously upgrade the power?

Nov 15th, 2006, 18:02	#1
PNuT MaDMaN Last Online: Nov 26th, 2022 18:47 Join Date: Sep 2006 Location: Red Lodge	2319 v 2435 just out of interest if you were planning to tune both of the above engines which one would be a better starting point?

Nov 15th, 2006, 18:57	#2
SIAMBLUE Premier Member Last Online: May 14th, 2024 22:20 Join Date: Dec 2003 Location: Ilford, Essex. View Photos By: SIAMBLUE	The latter if you could get one, but you would not want a early 2319, the later ones 99 are the strongest, and have the green injectors on the R, __________________ V70 P2 facelift D5 6sp manual E4 Sport SE Ocean Race Blue pearl (2005) 97k, standard.

Nov 15th, 2006, 19:02	#3
Rooster Speed freak Last Online: Apr 3rd, 2020 22:04 Join Date: Nov 2003 Location: Yorkshire	I'd get a later spec 2319 lump and use that as the 2435's have thinner bore walls and i've seen a couple that have cracked altho not on R's but on the cross country AWD's __________________ 04 XC90 D5 --- Big bus 00 pug 306HDi --- Run about 88 pug 309GTi --- Project track car 07 CB600 Hornet --- 2 wheel fun

Nov 15th, 2006, 20:19	#4
PNuT MaDMaN Last Online: Nov 26th, 2022 18:47 Join Date: Sep 2006 Location: Red Lodge	so it gets confusing? my question was kind of aimed at if you wanted to upgrade turbo chip & exaust are the walls too thin on a 2435 lpt engine too seriously upgrade the power?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)