|
700/900 Series General Forum for the Volvo 740, 760, 780, 940, 960 & S/V90 cars |
Information |
|
740 brakes affecting idle?Views : 1988 Replies : 15Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Jun 22nd, 2010, 23:15 | #1 |
Senior Member
Last Online: Jun 2nd, 2013 22:00
Join Date: Jun 2010
Location: salford
|
740 brakes affecting idle?
hello all,
I've noticed that when my car is cold it will idle up and down at 500 rpm and 'chug' once warmed up it will run perfect...however i've noticed if i pump the brake pedal quickly on idle that same chugging returns and i assume when brake vacuum rebuilds again, the idle smooths out once again.....should there be a non return valve on the vacuum pipe between the manifold and the master cylinder? |
Jun 22nd, 2010, 23:25 | #2 | |
VOC Member
Last Online: May 4th, 2023 20:38
Join Date: Nov 2007
Location: West Sussex
|
Quote:
__________________
William 745 GL - 1986, B230K 745 GLE - 1987, B230E |
|
Jun 22nd, 2010, 23:37 | #3 | |
Premier Member
Last Online: Mar 18th, 2011 13:38
Join Date: May 2009
Location: grassmere!
|
Quote:
there is a cold start problem with the car,dependant on engine variant.
__________________
|
|
Jun 23rd, 2010, 07:25 | #4 |
Senior Member
Last Online: Jun 2nd, 2013 22:00
Join Date: Jun 2010
Location: salford
|
Thank you guys, i checked and the vacuum is still there after the engine is turned off, even when left sitting over night so we know its not the check valve in this case...
the engine is the 'B200E' (2.0 , continuous injection, with no catalytic converter, it runs on lead replacement petrol, but would be nice if i could get hold of real leaded fuel. I've noticed theres no 'engine light' does that mean theres no onboard diagnostics or fuel injection computer, or is this a purely mechanical system? Sorry for so many questions, this is my first volvo :-) |
Jun 23rd, 2010, 08:45 | #5 |
Volvologist
Last Online: Dec 6th, 2023 11:13
Join Date: Aug 2008
Location: Bangor - Norn Iron
|
Fairly normal for slightly rough idle when cold on these engines, any hot start issues?
No electronics for the injection on these engines, other than the cold start injector.
__________________
What's the matter with the car I'm driving? Can't you tell that it's out of style? Should I get a set of white wall tires? Are you gonna cruise the miracle mile? |
Jun 23rd, 2010, 09:15 | #6 |
Member
Last Online: Dec 3rd, 2015 15:28
Join Date: Dec 2008
Location: Cheshire
|
hi fella - my B200e runs very happily on unleaded with no problems - Volvos were designed for Unleaded very early on so highly likely you can use premium unleaded - though of course they do prefer to run on the higher octane stuff and mine runs a lot happier on v-power - no issues other than that. Might save you a pretty penny and be easier to get hold of....
|
Jun 23rd, 2010, 12:11 | #7 |
Premier Member
Last Online: Mar 18th, 2011 13:38
Join Date: May 2009
Location: grassmere!
|
first thing I would do is change the injector seals as these tend to leak and draw air causing poor idle,then the co will need adjusting after.
__________________
|
Jun 27th, 2010, 22:13 | #8 | |
Senior Member
Last Online: Jun 2nd, 2013 22:00
Join Date: Jun 2010
Location: salford
|
Quote:
No hot start issues whatsoever....its a bit of a strange one..... i'm now suspecting the idle air control valve...(auxillary air valve) |
|
Jun 27th, 2010, 22:15 | #9 |
Senior Member
Last Online: Jun 2nd, 2013 22:00
Join Date: Jun 2010
Location: salford
|
Are these easy to do? i mean i'm generally a little knowledgeable of cars, i change oil, filters and plugs, glow plugs, bulbs etc, most easily manageable tasks. Where can i get injector seal kits from?
|
Jun 27th, 2010, 22:20 | #10 | |
Senior Member
Last Online: Jun 2nd, 2013 22:00
Join Date: Jun 2010
Location: salford
|
Quote:
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|