|
S60 & V60 '11-'18 / XC60 '09-'17 General Forum for the P3-platform 60-series models |
Information |
|
Clutch issues 2012 XC60Views : 1300 Replies : 7Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Jul 18th, 2018, 18:45 | #1 |
Junior Member
Last Online: Sep 23rd, 2019 00:08
Join Date: May 2016
Location: Southport
|
Clutch issues 2012 XC60
Evening all, just been driving down the coast road in my town, driving along, put it in 4th from 3rd, and around 2250-2500rpm the revs increase by say 250-300 rpm, I suspect the clutch is toast? Pretty confident that’s the case, just wanted a second opinion. So new clutch, is Volvo best is is an after market one just as good, also do I need to do the flywheel at the same time or not?
TIA. |
Jul 18th, 2018, 18:51 | #2 | |
Member
Last Online: Dec 23rd, 2020 11:20
Join Date: Sep 2012
Location: Lincoln
|
Quote:
These have a Dual Mass Flywheel which almost certainly need replacing as well. |
|
Jul 18th, 2018, 19:27 | #3 |
Junior Member
Last Online: Mar 7th, 2022 22:28
Join Date: Nov 2017
Location: Worcester
|
I've had an issue under load the revs go up around 5-700revs and then drop back down! Mines just on 60k I had it remapped and clutched slipped straight away so had map removed and has only intermittently done this random slip ever since! It's gone in today for a new 3 piece clutch and have the flywheel checked at same time! I've gone for an LUK kit...
|
Jul 18th, 2018, 20:59 | #4 |
Junior Member
Last Online: Sep 23rd, 2019 00:08
Join Date: May 2016
Location: Southport
|
|
Jul 19th, 2018, 17:09 | #5 |
Junior Member
Last Online: Mar 7th, 2022 22:28
Join Date: Nov 2017
Location: Worcester
|
Well mine is finally apart and found issue that's been causing intermittent slip, dual mass has overheated and leaked grease into box and onto clutch plate causing slip until it burns off! This is the outcome of having a remap at a place in Mansfield that caused it to slip within 2miles of having map done, hence why map no longer on car! I'd advise on speaking with dealer for cost of dual mass S ended up being cheaper than any of the factors prices by a long way!
|
Jul 19th, 2018, 22:13 | #6 | |
Junior Member
Last Online: Sep 23rd, 2019 00:08
Join Date: May 2016
Location: Southport
|
Quote:
I’ve been quoted today £1080 for a full clutch kit, Slave cylinder and DMF, with 6 hours labour at my local independent garage. |
|
Jul 20th, 2018, 06:24 | #7 |
Junior Member
Last Online: Mar 7th, 2022 22:28
Join Date: Nov 2017
Location: Worcester
|
I assume yours must be a 2wd if they are sayingv6hrs as I’m sure the book time for my awd is around 9 🙁
|
Jul 23rd, 2018, 14:06 | #8 |
Grimble
Last Online: Feb 4th, 2019 17:54
Join Date: Jun 2016
Location: Staffordshire
|
Thats a very similar price to what I paid in May at my indy for exactly the same work. Same spec vehicle as well. Work was done at approx 120k miles so should see the vehicle out.
__________________
2012 XC60 D4 SE Lux Nav |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|