|
140/164 Series General Forum for the Volvo 140 and 164 cars |
Information |
|
New 142Views : 130365 Replies : 265Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Jan 21st, 2021, 19:29 | #71 |
Chief Bodger
Last Online: Today 20:41
Join Date: Oct 2009
Location: Aberdeen
|
These are 205s look too big for the rim from the pic.
__________________
One day I will get rid of all of the rust. |
Jan 21st, 2021, 19:41 | #72 | |
Chief Bodger
Last Online: Today 20:41
Join Date: Oct 2009
Location: Aberdeen
|
Quote:
Yeah there are old style 185/70 tyres and yes pretty expensive. I have a M41 from a 73 car but not in yet. Most of my driving is on A roads, not really too much on motorways. I would prefer to keep close to the original tyre size but have seen other folk with the 185/65 also. The 195s do offer a lot of good tyres at a reasonable price.
__________________
One day I will get rid of all of the rust. |
|
The Following User Says Thank You to Burdekin For This Useful Post: |
Jan 22nd, 2021, 22:02 | #73 |
Senior Member
Last Online: Dec 19th, 2023 00:34
Join Date: Mar 2014
Location: Seaside town Lincs
|
Be careful you don't go too wide tyres
My Gold 1971 164 was fitted with 205 tyres by the previous owner and the tires rub on the anti-roll bar when turning its taken off the paint to the bare metal also I think its an MOT failure too if they rub look here for tyres https://www.longstonetyres.co.uk/
__________________
Just because you own a welder it does not mean you can weld. Let's Go Brandon! Last edited by AndrewBrown; Jan 22nd, 2021 at 22:09. |
Feb 6th, 2021, 19:55 | #75 |
Chief Bodger
Last Online: Today 20:41
Join Date: Oct 2009
Location: Aberdeen
|
Went for Goodyear efficientgrip performance 2 195 65 15 tyres for the ATS rims. Don't think you would want to go any wider on these rims. Also bought a set of GT rims, they were cheap so couldn't resist.
Next job is to strip out the seats and carpets. Fix any rust and add the soundproofing. Needs to be complete before end of the month. Then some more suspension and engine mods in early March. New slightly lower progressive springs, a new good used front cross member which needs topcoating, new wishbones and PU bushes. Then a wee bit of engine upgrades; TT3 cam, timing gears, 7kg flywheel, clutch and unleaded head conversion. Hopefully Covid permitting will be driving her down to Englandshire in April.
__________________
One day I will get rid of all of the rust. |
The Following 2 Users Say Thank You to Burdekin For This Useful Post: |
Feb 6th, 2021, 22:35 | #76 |
Premier Member
Last Online: Today 19:30
Join Date: May 2012
Location: Lakenheath
|
Nice! Always been a fan of those style ATS alloys, optional on Mk1 Cavaliers but sadly not fitted by many people, really sets cars off well those wheels.
Will really look the part on a 142!
__________________
Cheers Dave Next Door to Top-Gun with a Honda CR-V & S Type Jag Volvo gone but not forgotten........ |
Feb 7th, 2021, 07:25 | #77 |
Chief Bodger
Last Online: Today 20:41
Join Date: Oct 2009
Location: Aberdeen
|
Yeah they look fab. Similar to the Ferrari F40 wheels which they also used a copy of in Oz that became known as Bathurst globe's.
__________________
One day I will get rid of all of the rust. |
The Following 2 Users Say Thank You to Burdekin For This Useful Post: |
Feb 18th, 2021, 11:01 | #78 |
Chief Bodger
Last Online: Today 20:41
Join Date: Oct 2009
Location: Aberdeen
|
Stripped out the interior this week and started prepping for some new paint, seam sealer and insulation. Increased my Swedish treasure hoard with another two coins. Also wet vacuumed the carpets and spray painted my replacement horn push. Got a fair bit to do over the next week.
Forgot, also vacuumed out the sills.
__________________
One day I will get rid of all of the rust. Last edited by Burdekin; Feb 18th, 2021 at 13:03. |
The Following 2 Users Say Thank You to Burdekin For This Useful Post: |
Feb 19th, 2021, 16:30 | #79 |
Master Member
Last Online: Today 16:24
Join Date: Jul 2020
Location: Saskatchewan, Canada
|
Your carpet cleaning appears to have come out well. Those appear to be the same brown carpets as I have in my 1971 142 E. I cleaned mine using one of those commercial hot water carpet cleaners and it took either 3 or 4 cleaning treatments before dirt stopped showing up in the cleaner's catch tank (40 + years accumulation). Your carpets appear to be in better condition than mine. My underlay ended up in the garbage can; but, the carpets were in remarkably good condition.
After cleaning I has some fading along the sides of the tunnel. I also had some burn marks as a previous owner of the car appeared to be a vigorous smoker (circular burn marks around the window winder crank, burn marks from missing the ash tray, burn marks on the driver seat cushion between the legs .....). The burn marks on the carpet were mostly on the driver's side just in front of the seat so not highly visible. They were just superficial so I re-fuzzed them by applying a little glue to the bald spots and sprinkling on some long fiber flock in a close color. Not perfect; but, better than before and largely hidden by my floor mats. To deal with the fading and try to color match my patch job better, I purchased several bottles of dark brown Rit fabric dye, put the carpets into a large heavy duty contractors garbage bag, dumped 3 or 4 gallons of hot water premixed with the Rit into the bag with the carpets, sealed them up and let them soak where they were exposed to the sun to keep the bags warm. I rotated them every 30 minutes or so to agitate the mixture. Following the dye job I did have to retape the seams in the carpet because I removed all the original binding materials in order to get the carpets to lay flat in the garbage bag. The dye job turned out better than I had expected. It is probably a touch darker than the previous color; but, that was in comparison to the 'before' condition which was faded. More importantly the carpet is now uniform in color. The Rit also turned out to be colorfast on the carpet. After recommissioning my car following restoration, it was put into storage for the winter. During storage, the rubber on my brand new heater hoses relaxed under the clamps at the back of the heater allowing about 2 l of coolant to slowly drain into the driver side footwell. In order to clean out this sticky mess I had to remove the carpets and use a hot water carpet cleaner to get the coolant out of the carpets. The color of the waste water in the catch tank ended up pale green indicating that there was no obvious wash out of the dye. As a related footnote for anybody replacing their coolant hoses, recheck your hose clamps about 1 month after replacement of the hoses. The rubber in use on a lot of the aftermarket hoses deforms under the pressure of the clamp resulting in loss of clamping pressure and sealing. Just about all the connections on my new rad and heater hoses developed oozing coolant leaks. |
The Following 2 Users Say Thank You to 142 Guy For This Useful Post: |
Feb 19th, 2021, 17:52 | #80 |
Chief Bodger
Last Online: Today 20:41
Join Date: Oct 2009
Location: Aberdeen
|
We have a wee wet Bissell vacuum cleaner at home which is excellent for this. I gave them three cleans, too much and you start sucking too much of the carpet fibres out. A lot of muck comes out. I have the original rubber mats to go back in as well so you don’t see too much of the carpet. Will get the first coat of epoxy mastic primer down tomorrow is the plan. Need to get it painted, insulated and sills rust proofed in the next week. Also got a replacement crossmember and wishbones to paint this week and fit poly bushes. Then it’s Amazon car springs, cam change, lightened flywheel, clutch, unleaded head conversion, timing gears etc by the 20th March. If I get time I also will be renewing the external trim and maybe polishing and clear coat the replacement bumpers. All going to plan will be driving down to Englandshire in April. Fingers crossed.
__________________
One day I will get rid of all of the rust. |
The Following 3 Users Say Thank You to Burdekin For This Useful Post: |
Currently Active Users Viewing This Thread: 2 (0 members and 2 guests) | |
|
|