No Mount for Slave Cylinder?

[Derek UK]

Here you go Ron.

[mocambique-amazone]

Originally Posted by Derek UK

Here you go Ron.

Could be mine Derek. My pics are analog and I'm too lazy to digitalise them (and post here, way too complicated for me)

Fantastic help as allways Derek

Best regards, Kay

[mocambique-amazone]

I did mount it the opposite way. At this pic the hydraulic line will move

[mocambique-amazone]

** O-Ringed Piston and DOT5 for hydr type**

Allways this Ron

Cheers, Kay

[Derek UK]

I think the pic was from a USA guy. I nicked it off Brickboard, as you can see, some time ago.

[Ron Kwas]

Derek;

Thanks for showing an example of what looks like one of the later slant 4cylinders with its Bellhousing, originally intended for a Cable Clutch (lower Cable termination appears to have been cut away), ready for service with a hydraulic Master Cylinder...showing once again, that a lot is possible...I'd be interested in long-term operational results of this set-up...can you post BB link?

Cheers

[mocambique-amazone]

Originally Posted by Ron Kwas

Derek;

Thanks for showing an example of what looks like one of the later slant 4cylinders with its Bellhousing, originally intended for a Cable Clutch (lower Cable termination appears to have been cut away), ready for service with a hydraulic Master Cylinder...showing once again, that a lot is possible...I'd be interested in long-term operational results of this set-up...can you post BB link?

Cheers

20 years and plus

Really good conversion

Have a nice evening, Kay

[Derek UK]

You'd have to do a search on BB, it was quite a while ago. Alternatively, ask about it there, maybe the poster will reply.