v70r breaking - Page 2

RollingThunder · Feb 14th, 2015, 19:21

How much do you want for the intake manifold? I'm going to be fitting a 3in throttle body, so it'd make the changeover easier if I had another to clean and port beforehand.

I'm also after the 'R' badge off the tailgate?

Also could do with 4x wheel bolts.

Finally, is the bonnet release cable ok? If the bonnet pops open easily then I'm interested in the cable that goes across the front of the car joining the two bonnet release catches.

Thanks

kevvydude · Feb 14th, 2015, 19:29

hi the bonnet opens fine, got loads of wheel bolts, the inlet manifold ,no probs, the r badge, say 50 plus post. for all, regards kev i only get 1 day a week to get stuff off, and have loads to take of so im doing stuff in order that it sells, so please dont expect stuff instant, but will get it off asap. thank you

RollingThunder · Feb 14th, 2015, 19:31

Magic, thanks, PM on its way

Green Whale · Feb 14th, 2015, 20:47

I'm assuming (hoping) that given this is a FWD R then the engine steady bar that connects the engine to the bulkhead will fit on a standard T5?

If so, what condition are it and the bushes in?

Thanks.

kevvydude · Feb 14th, 2015, 21:27

hi, the bar is good, but the bushes are naff, have you thought about polly buses, just a thought

Green Whale · Feb 14th, 2015, 21:31

I was going to polly bush it if they were shot so this just gives me an excuse!

I'll PM you about price etc.

Edit: Scratch that, I can't PM until I have 30 posts. Can I email you instead?

tc · Feb 14th, 2015, 21:46

Quote:

Originally Posted by kevvydude

its good, had a quick look, only picked car up friday and its been raining since, no blow. i will get under it when rain stops, £ 60 plus post , regards kev,

Can you check what flange it is? (ie straight or angles please?) doesnt really matter as I have access to both but it'd be good to know.

Rogo1806 · Feb 15th, 2015, 12:35

Hi How much for the drivers front seat? Where about are you? Would need some trim bits like the A Post Trim.

Thanks,
Rohit

kevvydude · Feb 15th, 2015, 12:41

hi im in aldershot hants, the seat works but needs cleaning , and its a long way from where you are m8

kevvydude · Feb 15th, 2015, 16:33

pic have been taken but wont upload, so bear with me please

Feb 14th, 2015, 19:21	#11
RollingThunder Grumpy Old Git Last Online: Jun 14th, 2024 15:52 Join Date: Dec 2004 Location: South Yorkshire View Photos By: RollingThunder	How much do you want for the intake manifold? I'm going to be fitting a 3in throttle body, so it'd make the changeover easier if I had another to clean and port beforehand. I'm also after the 'R' badge off the tailgate? Also could do with 4x wheel bolts. Finally, is the bonnet release cable ok? If the bonnet pops open easily then I'm interested in the cable that goes across the front of the car joining the two bonnet release catches. Thanks __________________ S40 2.4i '07 Japanese import '96 850R - https://www.volvoforums.org.uk/showthread.php?t=312484 Ex Danish Embassy '96 940 GLE LPT - https://www.volvoforums.org.uk/showthread.php?t=326071

Feb 14th, 2015, 19:29	#12
kevvydude Premier Member Last Online: Nov 9th, 2017 22:33 Join Date: Oct 2007 Location: Aldershot Hampshie	hi the bonnet opens fine, got loads of wheel bolts, the inlet manifold ,no probs, the r badge, say 50 plus post. for all, regards kev i only get 1 day a week to get stuff off, and have loads to take of so im doing stuff in order that it sells, so please dont expect stuff instant, but will get it off asap. thank you __________________ a clean car requires a certain amount of mental illness ʎɐqǝ uo pɹɐoqʎǝʞ ɐ ʎnq ı ǝɯıʇ ʇsɐן ǝɥʇ sı sıɥʇ

Feb 14th, 2015, 19:31	#13
RollingThunder Grumpy Old Git Last Online: Jun 14th, 2024 15:52 Join Date: Dec 2004 Location: South Yorkshire View Photos By: RollingThunder	Magic, thanks, PM on its way __________________ S40 2.4i '07 Japanese import '96 850R - https://www.volvoforums.org.uk/showthread.php?t=312484 Ex Danish Embassy '96 940 GLE LPT - https://www.volvoforums.org.uk/showthread.php?t=326071

Feb 14th, 2015, 21:27	#15
kevvydude Premier Member Last Online: Nov 9th, 2017 22:33 Join Date: Oct 2007 Location: Aldershot Hampshie	hi, the bar is good, but the bushes are naff, have you thought about polly buses, just a thought __________________ a clean car requires a certain amount of mental illness ʎɐqǝ uo pɹɐoqʎǝʞ ɐ ʎnq ı ǝɯıʇ ʇsɐן ǝɥʇ sı sıɥʇ

Feb 14th, 2015, 21:31	#16
Green Whale Junior Member Last Online: May 14th, 2021 13:08 Join Date: Feb 2015 Location: Marlborough	I was going to polly bush it if they were shot so this just gives me an excuse! I'll PM you about price etc. Edit: Scratch that, I can't PM until I have 30 posts. Can I email you instead? Last edited by Green Whale; Feb 14th, 2015 at 21:33.

Feb 14th, 2015, 20:47	#14
Green Whale Junior Member Last Online: May 14th, 2021 13:08 Join Date: Feb 2015 Location: Marlborough	I'm assuming (hoping) that given this is a FWD R then the engine steady bar that connects the engine to the bulkhead will fit on a standard T5? If so, what condition are it and the bushes in? Thanks.

Feb 15th, 2015, 12:35	#18
Rogo1806 Junior Member Last Online: Mar 30th, 2023 11:03 Join Date: Oct 2012 Location: Birmingham	Driver seat Hi How much for the drivers front seat? Where about are you? Would need some trim bits like the A Post Trim. Thanks, Rohit

Feb 15th, 2015, 12:41	#19
kevvydude Premier Member Last Online: Nov 9th, 2017 22:33 Join Date: Oct 2007 Location: Aldershot Hampshie	hi im in aldershot hants, the seat works but needs cleaning , and its a long way from where you are m8 __________________ a clean car requires a certain amount of mental illness ʎɐqǝ uo pɹɐoqʎǝʞ ɐ ʎnq ı ǝɯıʇ ʇsɐן ǝɥʇ sı sıɥʇ

Feb 15th, 2015, 16:33	#20
kevvydude Premier Member Last Online: Nov 9th, 2017 22:33 Join Date: Oct 2007 Location: Aldershot Hampshie	piccys pic have been taken but wont upload, so bear with me please __________________ a clean car requires a certain amount of mental illness ʎɐqǝ uo pɹɐoqʎǝʞ ɐ ʎnq ı ǝɯıʇ ʇsɐן ǝɥʇ sı sıɥʇ

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)