2 x Phase 2 cup holder centre consoles! - Page 2

dmiller · Dec 24th, 2013, 18:05

Quote:

Originally Posted by Antz

NOW BOTH WITH LEATHER TOPS!

£28 delivered for the good one
£22 delivered for the one with the chip.

I'm interested after spilling juice over the interior. Again...

For the one with the chip could I swap over the bit from my current one or is it moulded in? If it can't be swapped I would like the one that's not chipped. I can't pm yet so any chance of a pm of your email address? I take it PayPal gifts ok?

cheers,

David.

Antz · Dec 24th, 2013, 20:03

Quote:

Originally Posted by dmiller

I'm interested after spilling juice over the interior. Again...

For the one with the chip could I swap over the bit from my current one or is it moulded in? If it can't be swapped I would like the one that's not chipped. I can't pm yet so any chance of a pm of your email address? I take it PayPal gifts ok?

cheers,

David.

PM on its way .

Antz · Dec 24th, 2013, 21:05

Good one sold!

Just the one with a chip left. Leather top. £22 DELIVERED!

sortedt4 · Dec 27th, 2013, 14:37

Antz

would this leave me with no lighter socket

Antz · Dec 27th, 2013, 17:52

Depends where your cigarette lighter is. If its in the console, yes. If its on the gearstick surround, no.

Or you could convert your car to the gearstick surround lighter socket.

s40rch · Dec 28th, 2013, 21:55

for the one with the chip, could I make one good one out of my current one, mine has a compartment, not cup holder?

Ryan

Antz · Dec 28th, 2013, 23:54

You might be able to swap that back panel over if you dismantle them. I haven't tried.

You can't swap the compartment and cup holders over. They are different sizes and unique to each console.

Antz · Dec 31st, 2013, 11:44

new years bump.

fat tony · Dec 31st, 2013, 13:46

Quote:

Originally Posted by Antz

You might be able to swap that back panel over if you dismantle them. I haven't tried.

You can't swap the compartment and cup holders over. They are different sizes and unique to each console.

Yep, the back panel will swap over, i made a good one out of 2 at the scrapyard once, the leather lid had been ripped off and damaged the rear panel.

Took about half an hour cos of the amount of screws in it

Antz · Dec 31st, 2013, 16:01

Cheers Tony, that's actually really helpful to know

So yep, you can swap them over as Tony says

Dec 24th, 2013, 21:05	#13
Antz No I'm not the redhead Last Online: Nov 25th, 2022 09:49 Join Date: Jun 2009 Location: North Yorkshire Coast	Good one sold! Just the one with a chip left. Leather top. £22 DELIVERED! __________________ 1988 Volvo 240 GLT T5 Swap a T5 motor into your RWD Volvo:The Guide

Dec 27th, 2013, 17:52	#15
Antz No I'm not the redhead Last Online: Nov 25th, 2022 09:49 Join Date: Jun 2009 Location: North Yorkshire Coast	Depends where your cigarette lighter is. If its in the console, yes. If its on the gearstick surround, no. Or you could convert your car to the gearstick surround lighter socket. __________________ 1988 Volvo 240 GLT T5 Swap a T5 motor into your RWD Volvo:The Guide

Dec 28th, 2013, 23:54	#17
Antz No I'm not the redhead Last Online: Nov 25th, 2022 09:49 Join Date: Jun 2009 Location: North Yorkshire Coast	You might be able to swap that back panel over if you dismantle them. I haven't tried. You can't swap the compartment and cup holders over. They are different sizes and unique to each console. __________________ 1988 Volvo 240 GLT T5 Swap a T5 motor into your RWD Volvo:The Guide

Dec 31st, 2013, 11:44	#18
Antz No I'm not the redhead Last Online: Nov 25th, 2022 09:49 Join Date: Jun 2009 Location: North Yorkshire Coast	new years bump. __________________ 1988 Volvo 240 GLT T5 Swap a T5 motor into your RWD Volvo:The Guide

Dec 31st, 2013, 16:01	#20
Antz No I'm not the redhead Last Online: Nov 25th, 2022 09:49 Join Date: Jun 2009 Location: North Yorkshire Coast	Cheers Tony, that's actually really helpful to know So yep, you can swap them over as Tony says __________________ 1988 Volvo 240 GLT T5 Swap a T5 motor into your RWD Volvo:The Guide

Dec 27th, 2013, 14:37	#14
sortedt4 Junior Member Last Online: Jan 14th, 2024 17:05 Join Date: Sep 2013 Location: dunstable	Antz would this leave me with no lighter socket

Dec 28th, 2013, 21:55	#16
s40rch Member Last Online: Aug 8th, 2018 12:01 Join Date: Oct 2009 Location: wiltshire	for the one with the chip, could I make one good one out of my current one, mine has a compartment, not cup holder? Ryan

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)