Parts Clear Out

[MAMDaveM]

Hi,

I'm looking for a rear driveshaft for my 1963/64 1800S as the threaded end is damaged. can't PM yet as I don't have enough posts.

best regards Dave (quarnford@btinternet.com)

[Les921]

hi,
I require a licence plate illuminator if chrome is good and a rear view mirror if in good condition. Also, if any out there can send photographs of the vents brackets and pipe work in the boot I would be very grateful. My 1800E had a new rear end before I bought it but the vandal used S rear wings doing away with the vents. I am having them reinstated but need more info. The black plastic vents that I have are shot so I also require a couple of those too.
Regards
Les

[Phid]

Hi there
I need a heater core if the price is right and it definitely doesn't leak. Please can you PM me or send email (p@moo50.plus.com) as I don't have enough posts to PM you yet.
Thanks
Philip

[Phid]

Hello again
I also need a chrome plastic bezel that sits behind the window winder if your happy to sell separately.
Thanks
Philip

[Sjacobsuk]

Sorry Dave, Drive shafts are already gone. Scott

Originally Posted by MAMDaveM

Hi,

I'm looking for a rear driveshaft for my 1963/64 1800S as the threaded end is damaged. can't PM yet as I don't have enough posts.

best regards Dave (quarnford@btinternet.com)

[Sjacobsuk]

Philip, sent you an email.

Originally Posted by Phid

Hi there
I need a heater core if the price is right and it definitely doesn't leak. Please can you PM me or send email (p@moo50.plus.com) as I don't have enough posts to PM you yet.
Thanks
Philip

[Sjacobsuk]

Les - the chrome is not very good on mine - you would definitely want to rechrome it. On the photos, have already sold the car so am unable to take any pictures - would have been happy to help. Before you commit fully you should look into the location of the vent and the fuel filler on the S vs. the E. That may limit how you can implement the vents on an S rear wing. Just a thought.

Originally Posted by Les921

hi,
I require a licence plate illuminator if chrome is good and a rear view mirror if in good condition. Also, if any out there can send photographs of the vents brackets and pipe work in the boot I would be very grateful. My 1800E had a new rear end before I bought it but the vandal used S rear wings doing away with the vents. I am having them reinstated but need more info. The black plastic vents that I have are shot so I also require a couple of those too.
Regards
Les

[Uplander]

Hi
I've sent to you a PM.

Thanks

[Sjacobsuk]

Have sold some things off and am updating the list. Travelling again for a few weeks so give me some time to reply

2 front bumper brackets (connects frame to bumper)
2 rear bumper brackets
One center bumper section (good)
One bumper corner section (good)
Master Cylinder with Resevoirs and Vacuum assist (not tested)
4 door hinges
Heater Fan (not tested)
Speedometer cable
Clutch cable
Ashtray
Radiator overflow bottle
Volvo Washer Motor (not tested)
2x door handles (no key for lock, Fair)
2x front turn/running light lenses and chrome rims (hairline cracks but not noticeable)
License plate illuminator
Clutch and brake pedals
Two Volvo headlights and chrome rims (fair but would polish up)
Heater/def interior lever set
Ashtray
Interior rearview mirror (ceiling mount)
Two exterior rear view mirrors, one Volvo.
Dash light switch
Dash fan switch
Mechanical fuel pump
Driver’s side Door main Window

I travel a bit - will respond as soon as I can.[/QUOTE]

[1800 jensen]

Hi,

Not sure if you would sell to O/S (Australia) , if you do I am interested in the washer motor...any chance in seeing a PIC?

Thanks