OBD2 on early 850s - Page 2

Chris_Rogers · May 10th, 2003, 07:20

No, there is no seporate ingnition module for Fenix 5.2

ShadeTek · May 10th, 2003, 07:53

...in that case then what does my pin 1 connect to?

Thanks

Tek.

Chris_Rogers · May 10th, 2003, 21:48

Nothing, it's just a spare wire in the loom.

ShadeTek · May 11th, 2003, 09:15

When I pulse that pin 5 times I get an "on" on my diagnostics unit. If I pulse it 2 more times, the LED flashes quickly! It must be connected to something.

Tek.

Chris_Rogers · May 11th, 2003, 21:01

Sorry, can't help.
You may find out by pulling fuses until the wire goes dead..

Chris_Rogers · Dec 10th, 2003, 20:53

Update

Members may be interested in the following link:

http://www.onboarddiagnostics.co.uk/volfcr/

ShadeTek · Dec 10th, 2003, 21:27

Hi, I have already tried the demo software and connecting to my 1995 850 10 V 2.5 cd. I can communicate using a laptop and a cable from the Alex Peper interface cable I have. I can connect to the ABS module, Dashboard, electronic seat memory, SRS, immobilizer and reset the service light. The SIR (service light)reset tool I bought cost me £60 quid alone. Graphically it's very basic but does the job. It found 3 DTCs I had in my ABS unit but would not tell me what they were being the demo software version. Worth £100 for the software alone?.....,mmmmmm, just on the far side of pricey for me as I am thinking of changing car soon to a later V70 anyway which would not be covered by this software. (It only cover v70 1997-8). I built myself an interface to interrogate the other car CPUs with £6.00s worth of bits out of Maplins.

Cheers

Tek.

Chris_Rogers · Dec 13th, 2003, 09:19

Here are some links for those who may wish to make their own interface cable:

http://www.skpang.co.uk/obdii_hardware.htm

http://www.andywhittaker.com/ecu/obdii_hardware.htm

http://www.planetfall.com/%7Ejeff/ob...hematic_b1.pdf

ShadeTek · Dec 21st, 2003, 12:25

OK, so I bought my onboardiagnostics package. It works and I can pull codes from my previously unaccessable ECUs. I've done a few screenshots and info at Volvospeed. Here's the links.

http://www.volvospeed.com/vs_forum/i...39&hl=software

http://www.volvospeed.com/vs_forum/i...c=16516&hl=abs

Chris_Rogers · Dec 21st, 2003, 19:51

Looks good,

How are you getting on with the ABS problem?

May 10th, 2003, 07:20	#11
Chris_Rogers VOC Member Last Online: Apr 10th, 2017 16:55 Join Date: Jan 1970 Location: South Kent Coast	RE: OBD2 on early 850s No, there is no seporate ingnition module for Fenix 5.2

May 10th, 2003, 07:53	#12
ShadeTek Premier Member Last Online: Jun 5th, 2024 17:42 Join Date: Dec 2002 Location: Renfrewshire View Photos By: ShadeTek	RE: OBD2 on early 850s ...in that case then what does my pin 1 connect to? Thanks Tek.

May 10th, 2003, 21:48	#13
Chris_Rogers VOC Member Last Online: Apr 10th, 2017 16:55 Join Date: Jan 1970 Location: South Kent Coast	RE: OBD2 on early 850s Nothing, it's just a spare wire in the loom.

May 11th, 2003, 09:15	#14
ShadeTek Premier Member Last Online: Jun 5th, 2024 17:42 Join Date: Dec 2002 Location: Renfrewshire View Photos By: ShadeTek	RE: OBD2 on early 850s When I pulse that pin 5 times I get an "on" on my diagnostics unit. If I pulse it 2 more times, the LED flashes quickly! It must be connected to something. Tek.

May 11th, 2003, 21:01	#15
Chris_Rogers VOC Member Last Online: Apr 10th, 2017 16:55 Join Date: Jan 1970 Location: South Kent Coast	RE: OBD2 on early 850s Sorry, can't help. You may find out by pulling fuses until the wire goes dead..

Dec 10th, 2003, 20:53	#16
Chris_Rogers VOC Member Last Online: Apr 10th, 2017 16:55 Join Date: Jan 1970 Location: South Kent Coast	RE: OBD2 on early 850s Update Members may be interested in the following link: http://www.onboarddiagnostics.co.uk/volfcr/

Dec 10th, 2003, 21:27	#17
ShadeTek Premier Member Last Online: Jun 5th, 2024 17:42 Join Date: Dec 2002 Location: Renfrewshire View Photos By: ShadeTek	RE: OBD2 on early 850s Hi, I have already tried the demo software and connecting to my 1995 850 10 V 2.5 cd. I can communicate using a laptop and a cable from the Alex Peper interface cable I have. I can connect to the ABS module, Dashboard, electronic seat memory, SRS, immobilizer and reset the service light. The SIR (service light)reset tool I bought cost me £60 quid alone. Graphically it's very basic but does the job. It found 3 DTCs I had in my ABS unit but would not tell me what they were being the demo software version. Worth £100 for the software alone?.....,mmmmmm, just on the far side of pricey for me as I am thinking of changing car soon to a later V70 anyway which would not be covered by this software. (It only cover v70 1997-8). I built myself an interface to interrogate the other car CPUs with £6.00s worth of bits out of Maplins. Cheers Tek.

Dec 13th, 2003, 09:19	#18
Chris_Rogers VOC Member Last Online: Apr 10th, 2017 16:55 Join Date: Jan 1970 Location: South Kent Coast	RE: OBD2 on early 850s Here are some links for those who may wish to make their own interface cable: http://www.skpang.co.uk/obdii_hardware.htm http://www.andywhittaker.com/ecu/obdii_hardware.htm http://www.planetfall.com/%7Ejeff/ob...hematic_b1.pdf

Dec 21st, 2003, 12:25	#19
ShadeTek Premier Member Last Online: Jun 5th, 2024 17:42 Join Date: Dec 2002 Location: Renfrewshire View Photos By: ShadeTek	RE: OBD2 on early 850s OK, so I bought my onboardiagnostics package. It works and I can pull codes from my previously unaccessable ECUs. I've done a few screenshots and info at Volvospeed. Here's the links. http://www.volvospeed.com/vs_forum/i...39&hl=software http://www.volvospeed.com/vs_forum/i...c=16516&hl=abs

Dec 21st, 2003, 19:51	#20
Chris_Rogers VOC Member Last Online: Apr 10th, 2017 16:55 Join Date: Jan 1970 Location: South Kent Coast	RE: OBD2 on early 850s Looks good, How are you getting on with the ABS problem?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)