Diagnostic trouble code question

S40Matt · Feb 11th, 2011, 22:28

I took my car into the garage today and got them to carry out a VIDA test and this is what came up.

DIM-0001 Mileage Manipulated | DTC is found not active

Any idea what can cause this code??

Clan · Feb 11th, 2011, 23:03

This code is stored if the mileage stroed differs more than about 300 miles from the current stored value , . It is most likely caused by a problem with the ABS control system as that is wher ethe distance travelled signals come from . If you had CEM DE01 too then thats that is the code to follow ....
what did the garage tell you , was it a main dealer ?

S40Matt · Feb 11th, 2011, 23:27

Posted twice. :s

S40Matt · Feb 11th, 2011, 23:32

These are the codes around it. I took it to Elite Volve in Bristol. The machanic didn't really point it out or say anything about at the time.

I did have a alternator fitted the other day though. Think I dropped a nut into it and caused a short. lol.

Clan · Feb 12th, 2011, 09:50

It looks like you suffered from low battery voltage perhaps caused by the alternator not charging? This would easily cause all those codes , as long a sthey managed to clear them all and you are having no problems now you should be fine ...

The only odd cose is the BCM 0032 which indicates that the left rear wheel signal is not there this could be caused by a damaged sensor OR a poor wheel bearing which has built in magnets for the sensor ,, But if no ABS message now dont worry about it :-0

S40Matt · Feb 12th, 2011, 20:35

Quote:

Originally Posted by Clan

BCM 0032 which indicates that the left rear wheel signal is not there this could be caused by a damaged sensor OR a poor wheel bearing which has built in magnets for the sensor

It's a warped disk I think. I'm saving up to fix that....

Feb 11th, 2011, 22:28	#1
S40Matt Senior Member Last Online: May 16th, 2015 22:08 Join Date: Jan 2011 Location: Bristol	Diagnostic trouble code question I took my car into the garage today and got them to carry out a VIDA test and this is what came up. DIM-0001 Mileage Manipulated \| DTC is found not active Any idea what can cause this code??

Feb 11th, 2011, 23:03	#2
Clan Experienced Member Last Online: Today 13:39 Join Date: Jun 2007 Location: L/H side	This code is stored if the mileage stroed differs more than about 300 miles from the current stored value , . It is most likely caused by a problem with the ABS control system as that is wher ethe distance travelled signals come from . If you had CEM DE01 too then thats that is the code to follow .... what did the garage tell you , was it a main dealer ? __________________ My comments are only based on my opinions and vast experience .

Feb 11th, 2011, 23:27	#3
S40Matt Senior Member Last Online: May 16th, 2015 22:08 Join Date: Jan 2011 Location: Bristol	Posted twice. :s Last edited by S40Matt; Feb 11th, 2011 at 23:34.

Feb 12th, 2011, 09:50	#5
Clan Experienced Member Last Online: Today 13:39 Join Date: Jun 2007 Location: L/H side	It looks like you suffered from low battery voltage perhaps caused by the alternator not charging? This would easily cause all those codes , as long a sthey managed to clear them all and you are having no problems now you should be fine ... The only odd cose is the BCM 0032 which indicates that the left rear wheel signal is not there this could be caused by a damaged sensor OR a poor wheel bearing which has built in magnets for the sensor ,, But if no ABS message now dont worry about it :-0 __________________ My comments are only based on my opinions and vast experience .

Feb 11th, 2011, 23:32	#4
S40Matt Senior Member Last Online: May 16th, 2015 22:08 Join Date: Jan 2011 Location: Bristol	These are the codes around it. I took it to Elite Volve in Bristol. The machanic didn't really point it out or say anything about at the time. I did have a alternator fitted the other day though. Think I dropped a nut into it and caused a short. lol.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)