|
400 Series General Forum for the Volvo 440, 460 and 480 cars |
Information |
|
PCD /Offset & Bore Diameter (Centre of wheel)?Views : 1443 Replies : 2Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Feb 8th, 2003, 18:50 | #1 |
Guest
Location:
|
PCD /Offset & Bore Diameter (Centre of wheel)?
Hi all,
I have the chance of a set of alloys from a mate, however I'm unsure of the above measurements, can any one help me?? The reason I'm asking is that they are for my dad's 440GLI that I don't really see often enough, hence how I don't know the measurements. (The car that is, not my father!!) Regards Dave M |
Feb 8th, 2003, 22:34 | #2 |
Guest
Location:
|
RE: PCD /Offset & Bore Diameter (Centre of wheel)?
PCD = 100mm (a circle drawn from the bolt holes with 100mm diameter)
Offset = 35-40mm ish, ET37 normally. Centre Bore = 52mm, aftermarket wheels usually have a bigger C/Bore and a plastic 'Spigot Ring' to reduce it. Saves them having to make lots of different wheel designs for the same PCD and Offset. http://www.tyresave.co.uk/fitment.html#VOLV |
Feb 8th, 2003, 23:31 | #3 |
Guest
Location:
|
RE: PCD /Offset & Bore Diameter (Centre of wheel)?
Thanks Chris, Superb!!!
Regards Dave M:D :9 :+ |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|