|
200 Series General Forum for the Volvo 240 and 260 cars |
![]() |
|
'Turnbuckle' adjustersViews : 1252 Replies : 17Users Viewing This Thread : |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Master Member
Last Online: Aug 22nd, 2022 17:32
Join Date: Jun 2006
Location: Derby
|
![]()
Hi All
My 1988 240GL (B200E) is in need of drive belt adjustment to the alternator and the power steering pump. The power steering pump has what is described in the Haynes manual as a 'turnbuckle' adjuster and there appears to be a similar arrangement for adjusting the alternator. My question is can the adjustment be made purely on the turnbuckle adjuster or do I need to slacken off the pivot and any other bolts as well before doing this? Thanks Phil |
![]() |
![]() |
![]() |
#2 |
240 Turbo
|
![]()
unscrew turnbuckle, slacken off locking nut, adjust unit, retighten locking nut, tighten turnbuckle.
__________________
1991 240 Turbo GL 1992 940 GL 1996 940 GLE Turbo Auto 1985 Bedford CF2 B230E |
![]() |
![]() |
The Following User Says Thank You to Suterman For This Useful Post: |
![]() |
#3 |
VOC Member
Last Online: Dec 3rd, 2021 08:39
Join Date: Jan 1970
Location: Sutton, near Ely
|
![]()
Which version of Haynes is that? Neither of mine (red and green) talk about a 'turnbuckle' adjuster and I don't see how it could be used in this situation.
Anyway, be that as it may. My PS pump needs the pivot bolt slackening before adjustment, the alternator doesn't. Always leave the adjusters slack after tightening the clamping bolt otherwise the vibration will snap the bolts rendering the adjuster useless. ie Loosen clamp bolt (and pivot bolt if necessary) Tighten adjuster to desired tension. Tighten clamp bolt (and pivot bolt if necessary) Loosen adjuster. |
![]() |
![]() |
![]() |
#4 |
Master Member
Last Online: Aug 22nd, 2022 17:32
Join Date: Jun 2006
Location: Derby
|
![]()
OK. I can't find now where I read about this model having turnbuckle adjusters. When I got down to it there was an adjuster bolt on each unit (with no locking nut) and a pivot bolt so, after giving everything a good squirt of penetrating oil, I followed the procedure which Mike Brace outlines in his article on changing the cam belt. In the end it was all quite straightforward.
The cam belt is coming due for replacement and I may tackle it if I don't have to remove the bottom pulley. Can anyone advise if this is necessary on the B200E engine? Cheers Phil |
![]() |
![]() |
![]() |
#5 |
VOC Member
Last Online: Dec 3rd, 2021 08:39
Join Date: Jan 1970
Location: Sutton, near Ely
|
![]()
Doing the cam belt by the book you need to take the crank pulley off. I think I may have heard rumours about doing it without but I can't see how.
|
![]() |
![]() |
![]() |
#6 |
240 Turbo
|
![]()
take the crank pully off, its only one bolt that hold it on.
__________________
1991 240 Turbo GL 1992 940 GL 1996 940 GLE Turbo Auto 1985 Bedford CF2 B230E |
![]() |
![]() |
![]() |
#7 |
Master Member
Last Online: Aug 22nd, 2022 17:32
Join Date: Jun 2006
Location: Derby
|
![]()
Thanks chaps. On the subject of cam belt replacement a local motor engineer who I have used before with confidence on several occasions has quoted me £105 labour inc VAT for doing the job. Sounds a little bit tasty to me, don't know what you think. Might be enough to persuade me to do it myself.
Phil |
![]() |
![]() |
![]() |
#8 | |
VOC Member
Last Online: Jun 11th, 2024 14:03
Join Date: Jul 2007
Location: Wakefield, West Yorkshire
|
![]()
I too worried about doing the cambelt on my car, but im 16 and I managed it! Im sure you can....
Its just a case of doing a bit of unbolting at the front of the engine (fan, shroud, etc), put it in gear with handbrake firmly on and undo main bolt from crank pulley. Replace belt (its easy), and refit everything.... Steve
__________________
Thor - mist blue 1980 244GT Wafty - gold 1972 164 Automatic Whooshy - graphite grey 1989 240 GLT Turbo 2003 titanium grey V70R auto Quote:
|
|
![]() |
![]() |
![]() |
#9 | |
Torquemeister
Last Online: Today 17:55
Join Date: Dec 2004
Location: Asgard, Cheshire
|
![]() Quote:
__________________
loki_the_glt - Skipper of the Exxon Valdez, driver of Sweden's finest sporting saloon - and pining for another Slant-4. |
|
![]() |
![]() |
![]() |
#10 | ||
VOC Member
Last Online: Jun 11th, 2024 14:03
Join Date: Jul 2007
Location: Wakefield, West Yorkshire
|
![]() Quote:
When I changed my cambelt I checked my centre bolt was tight, and im sure it moved a little bit when I tightened it, but I put the torque wrench on it and set it correctly, so it must be fine. Steve
__________________
Thor - mist blue 1980 244GT Wafty - gold 1972 164 Automatic Whooshy - graphite grey 1989 240 GLT Turbo 2003 titanium grey V70R auto Quote:
|
||
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|