|
140/164 Series General Forum for the Volvo 140 and 164 cars |
![]() |
|
Have i got an E or an FViews : 1347 Replies : 8Users Viewing This Thread : |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Member
Last Online: Jun 11th, 2017 19:24
Join Date: Apr 2007
Location: Skipton
|
![]()
Can anyone tell me how to tell if my 1973 144 GL has a B20E or B20F engine?
When did they swap over? Can you tell from the chassis number (382684) |
![]() |
![]() |
![]() |
#2 |
New Member
Last Online: Oct 24th, 2008 10:34
Join Date: Nov 2004
Location: South Gippsland, Australia
|
![]()
What's the full engine number (both the cast & stamped parts) ? I'll look it it up for you .....
I thought the low compression B20F was mainly a USA market version though (for emissions purposes) ? Certainly here in Australia all the injected 140s had the B20E. Dave |
![]() |
![]() |
![]() |
#3 |
Volvo-loving biker
Last Online: Feb 3rd, 2019 05:24
Join Date: Sep 2006
Location: All alone in the crazy city
|
![]()
The F spec is a better drive than the E, anyway - the nominal 5bhp loss is more than made up for by its less peaky character. If you have an E it's well worth fitting the thicker F head gasket IMO.
|
![]() |
![]() |
![]() |
#4 | |
New Member
Last Online: Oct 24th, 2008 10:34
Join Date: Nov 2004
Location: South Gippsland, Australia
|
![]() Quote:
![]() |
|
![]() |
![]() |
![]() |
#5 |
Volvo-loving biker
Last Online: Feb 3rd, 2019 05:24
Join Date: Sep 2006
Location: All alone in the crazy city
|
![]()
Well it isn't really, is it
![]() ![]() |
![]() |
![]() |
![]() |
#6 | |
New Member
Last Online: Oct 24th, 2008 10:34
Join Date: Nov 2004
Location: South Gippsland, Australia
|
![]() Quote:
We never got the B20F over here, so I have never driven one. (Haven't driven a "proper" B20E either for that matter .... but my B20B-powered 144 with B20E head & cam & twin SUs goes nicely enough ![]() |
|
![]() |
![]() |
![]() |
#7 |
Volvo-loving biker
Last Online: Feb 3rd, 2019 05:24
Join Date: Sep 2006
Location: All alone in the crazy city
|
![]()
Sure, but that's not to say that compression has no effect; there are plenty of engines where there is a "lugging" version in a van or something which is just the same as the car version but with lower compression, and so has lower power output, but a wider and flatter torque curve.
|
![]() |
![]() |
![]() |
#8 |
Master Member
|
![]()
The head height from a B20E is 3.34in(84,9mm) from a B20F it is 3.42in(87.0mm) measured between cylinder head joint face and face for bolt heads. Compression ratio for a B20E is 1:10.5 for a B20F 1:8.7. They both have a D camshaft. The B20F was made only for the American market from '72-'75. So only American 1800E's from '70 & '71 were fitted with the B20E.
__________________
|
![]() |
![]() |
![]() |
#9 |
Experienced Member
Last Online: Today 11:57
Join Date: Jun 2007
Location: L/H side
|
![]()
It must be remembered that the 144 GL had the B20E whilst the injection 145 Had the
B20F ( In the UK anyway )
__________________
|
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|