|
XC90 '02–'15 General Forum for the P2-platform XC90 model |
Information |
|
AC IssueViews : 248 Replies : 2Users Viewing This Thread : |
|
Thread Tools | Display Modes |
May 25th, 2024, 20:40 | #1 |
Junior Member
Last Online: May 26th, 2024 06:59
Join Date: Oct 2021
Location: Stockton-on-tees
|
AC Issue
Hi all,
Got my 2007 XC90 re-gassed this time last year. It worked fine for a few weeks then stopped. VIDA was showing really low pressure. Had it re-gassed again today and has been working perfectly. Just been out to take a pressure reading so i can monitor over the coming weeks to see if its dropping. It was showing 607kpa and the AC relay not engaged. No matter what settings i selected, i couldn't get the relay to engage. I tried to turn on the activation and nothing happened. I unplugged the connector from the pressure sensor and seen the readout shoot up real high. Plugged it back in and everything is working fine with a reading of around 1500kpa Does this reading seem normal? Why would unplugging the pressure sensor cause it to start working again? Should i be thinking about replacing the sensor? I checked around best I could with a UV torch but couldn't see any sign of leaks. Surely they would have said today if the system was still full? |
May 25th, 2024, 23:42 | #2 | |
Experienced Member
Last Online: Today 16:02
Join Date: Jun 2007
Location: L/H side
|
Quote:
__________________
My comments are only based on my opinions and vast experience . |
|
May 26th, 2024, 06:59 | #3 |
Junior Member
Last Online: May 26th, 2024 06:59
Join Date: Oct 2021
Location: Stockton-on-tees
|
Ok thanks. I'm assuming I'll need a regas after removing the pressure switch?
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|