|
PV, 120 (Amazon), 1800 General Forum for the Volvo PV, 120 and 1800 cars |
Information |
|
Amazon Estate rear seat fittingsViews : 245 Replies : 1Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Feb 1st, 2024, 16:34 | #1 |
New Member
Last Online: Mar 12th, 2024 21:27
Join Date: Nov 2022
Location: Leeds
|
Amazon Estate rear seat fittings
Hi, is there anyone out there with an Amazon estate that could post a picture of the rear seat back lower pivot points. I know on one side there is a bracket that a spring loaded pin goes into but I would like to see what is on the other side. All of these parts are missing on the car I have and all the drawings/catalogues I can find only show one side.
Thanks in advance Andy... |
Feb 1st, 2024, 18:12 | #2 |
Junior Member
Last Online: May 29th, 2024 18:00
Join Date: Jun 2020
Location: Beekdaelen
|
Hi,
on both sides of the body the same steel part is fitted with 3 nuts each, see: https://www.oudevolvo.nl/wp-content/...achterbank.jpg The round hole in the middle of the steel part is for the pin / pivot point in the rear seat back (one side fix and other side spring loaded), the long hole aside in the steel part is for being able to press the spring loaded pin back (with a screwdriver or so) and release this pivot point of the rear seat back making it able to remove the rear seat back out of the car. If complete this steel part is covered by a black plastic round cap. Last edited by Nullifie; Feb 1st, 2024 at 18:15. |
The Following 2 Users Say Thank You to Nullifie For This Useful Post: |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|