|
S80 '98-'06 / S60 '00-'09 / V70 & XC70 '00-'07 General Forum for the P2-platform S60 / V70 / XC70 / S80 models |
Information |
|
Fault p0244 pending v70 d5 2004Views : 253 Replies : 2Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Dec 12th, 2023, 14:18 | #1 |
New Member
Last Online: Feb 28th, 2024 11:04
Join Date: Jul 2023
Location: BRIGHTON
|
Fault p0244 pending v70 d5 2004
Was wondering if anyone could give me some advice
I have recently purchased for £550 a 2004 v70 d5 se lux with 210k miles that has been cherished and only serviced at volvo up until 2021 🥹 It has a couple of niggly things wrong but one of those things is an abs fault, somtimes when you start the car the abs fault will be there somtimes it pops up half way down the road and the car goes into limp mode until i turn dtsc off then absolutely no issues and the car runs perfectly. I plugged my obd in today and I have only one pending code - p0244 which refers to turbo wastegate solenoid. Now could this be coming up because of the abs fault and the car being in limp mode or could this be a separate fault? There are no problems with the turbo or with getting power after I've turned the dtsc off and it sounds lovely when it spools up! I'm new to mechanics so forgive me if I'm being ignorant I'm trying to learn and do as much as I can myself! Thanks in advance |
Dec 12th, 2023, 14:44 | #2 |
Premier Member
Last Online: Today 19:33
Join Date: Dec 2017
Location: North of Hadrian's Wall & South of Antonine's Wall
|
Abs fault will most likely be a cracked reluctor ring or sensor needing replaced. A good diagnostics tool should tell you what the fault is
Turbo waste gate P0244 is the cause of going into limp mode and as far as I'm aware an ABS fault doesn't put the car into limp mode
__________________
MY2010 XC90 SE (M66-manual) Magic Blue (467) Sold MY1997 850 GLT (62,000 miles) Silver Sand (419) MY2005 V70 2.5T (66,000 miles) Willow Green (471) Volvo 850 GLT website |
The Following User Says Thank You to 4x4 For This Useful Post: |
Dec 12th, 2023, 17:05 | #3 |
Premier Member
Last Online: Today 20:54
Join Date: Mar 2017
Location: Manchester
|
check vac engine mounts for leakage as this is a common cause of turbo problems the po244 code is a generic code for turbo or actuator faults abs faults can activate limp mode try to get the codes read with vida as this will tell you exactly where the fault lies ps im fairly sure d5 dose not have a waste gate . it has a vv turbo
|
The Following User Says Thank You to Simmy For This Useful Post: |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|