|
Diesel Engines A forum dedicated to diesel engines fitted to Volvo cars. See the first post in this forum for a list of the diesel engines. |
Information |
|
D5244T injector leakViews : 637 Replies : 1Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Nov 26th, 2023, 22:49 | #1 |
New Member
Last Online: Jun 11th, 2024 04:58
Join Date: Aug 2022
Location: Sydney
|
D5244T injector leak
I have a 2010 XC90 D5 that had a leak from the top end around the swirl flap arm and at the back near the engine mount.
In order to get the injectors out I ended up having to unscrew the top of the injectors so I could use an injector remover. I was careful not to lose any parts and I immediately reassembled them one each one was removed. Fast forward to putting everything back together and I know have the issue of the engine not starting and lots of diesel pooling in the top of the engine. I made sure to remove the old washers from the block, and installed new washers for the injectors. I did reuse the clamps and the bolts, (I have the later style clamps that are bolts and not the hex screws). I am thinking the issue might be that the o-rings inside the injectors might be the issue. I am currently waiting on a call back from a local diesel specialist to see if i can get them to service the injectors, but was wondering if anyone had any suggestions on what i might have missed? Thanks |
Nov 26th, 2023, 23:52 | #2 | |
Experienced Member
Last Online: Yesterday 16:06
Join Date: Jun 2007
Location: L/H side
|
Quote:
__________________
My comments are only based on my opinions and vast experience . |
|
The Following User Says Thank You to Clan For This Useful Post: |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|