|
Information |
|
Bosch injectors. Engine code: D5244T4Views : 1277 Replies : 10Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Nov 23rd, 2023, 09:07 | #1 |
New Member
Last Online: May 26th, 2024 17:51
Join Date: Oct 2023
Location: Ipswich
|
Bosch injectors. Engine code: D5244T4
I’m in the process of replacing the swirl flaps on my s60 D5 185 and after having the injectors tested. I’m in need of injectors 0445110251. and clamp kit if at all possible. Thanks
|
Nov 23rd, 2023, 10:40 | #2 |
Experienced Member
Last Online: Yesterday 23:25
Join Date: Jun 2007
Location: L/H side
|
you will need 5 clamp kits and a whole set of pipes too the pipes form to the injector when first tightened and must not be reused.The clamps will never give the same clamping force twice as they deform when fitting first time. this will result in loose injectors after time and could well damage the injector seat in the head.
__________________
My comments are only based on my opinions and vast experience . |
Nov 25th, 2023, 14:12 | #3 |
Senior Member
Last Online: Mar 29th, 2024 18:09
Join Date: Aug 2007
Location: Penzance
|
Just had swirl flaps renewed on my 185bhp, horrific bill even using an independent. I bought new injector washers but not the clamps or pipes, they said they remove and replace existing ones all the time without issue. Note I did have to use VIDA to recalibrate the swirl actuator afterwards to clear an EML.
|
Nov 25th, 2023, 14:17 | #4 | |
Experienced Member
Last Online: Yesterday 23:25
Join Date: Jun 2007
Location: L/H side
|
Quote:
__________________
My comments are only based on my opinions and vast experience . |
|
Nov 27th, 2023, 09:12 | #5 |
Senior Member
Last Online: Mar 29th, 2024 18:09
Join Date: Aug 2007
Location: Penzance
|
I've had injectors replaced in a different V70 years ago and non of them blew. I seriously hope not as I'm in debt for a long time on this job. Sadly though the EML is back and fuel economy is worse than before the job. It's not looking good.
|
Dec 2nd, 2023, 18:33 | #6 | |
Master Member
Last Online: Today 01:10
Join Date: Apr 2014
Location: Stroud
|
Quote:
|
|
The Following User Says Thank You to P505DEF For This Useful Post: |
Dec 21st, 2023, 13:51 | #7 |
Master Member
Last Online: May 26th, 2024 12:33
Join Date: Nov 2006
Location: Reading
|
|
Dec 26th, 2023, 22:45 | #8 |
Junior Member
Last Online: May 3rd, 2024 14:54
Join Date: Dec 2023
Location: Aylesbury
|
Excuse the thread hi-jacking or newbie question....what year/engine model did the swirlflaps come in with?
__________________
'05 S60 D5 Sport Auto |
Dec 26th, 2023, 23:23 | #9 |
Master Member
Last Online: May 26th, 2024 12:33
Join Date: Nov 2006
Location: Reading
|
They came in with the E4 engine. E3 have a black engine cover, E4 have a more square edged engine cover with a silver insert on the top of the cover. The changeover was sometime in 2005, just after the facelift.
|
The Following User Says Thank You to eternal optimist For This Useful Post: |
Dec 27th, 2023, 01:01 | #10 |
Junior Member
Last Online: May 3rd, 2024 14:54
Join Date: Dec 2023
Location: Aylesbury
|
Ok thanks. I have a 2005, so just need to figure out if I have the E3 or E4.
__________________
'05 S60 D5 Sport Auto |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|