XC60 recall R/2020/246 - wiper arm securing nut

[justj]

I have today received a recall notice for XC60's model year 2018 to 2020.

Vehicles may have incorrectly tightened front wiper arm securing nuts. If one or both of the nuts were to loosen, the wiper arm could contact the bonnet causing an unusual noise, in a worst-case scenario there could be a reduced or no wiper function.

I assume those affected will get a letter - but just letting those know in case.

[EssexExile]

Originally Posted by justj

I have today received a recall notice for XC60's model year 2018 to 2020.



I assume those affected will get a letter - but just letting those know in case.

Mine was done at the last service in January. Well, I assume it was done although I've had a new wiper motor previously so I'd hope it was tightened properly then.

[Polestar Pete]

I’m pretty sure mine was done at a previous service before I bought my car. I did wonder why a wiper blade nut was mentioned on the service sheet. Now I know!

[Ringthane]

I took mine in this morning, to have them sort out the engine overfill warning, and I found out they’d done the wiper recall and a software update, at the same time.

[V90Towman]

Originally Posted by Ringthane

I took mine in this morning, to have them sort out the engine overfill warning, and I found out they’d done the wiper recall and a software update, at the same time.

Out of interest do you know what the software update consisted of?