|
700/900 Series General Forum for the Volvo 740, 760, 780, 940, 960 & S/V90 cars |
Information |
|
Fan clutch fault?Views : 828 Replies : 24Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Mar 6th, 2021, 20:11 | #21 |
Senior Member
Last Online: Jul 5th, 2023 07:30
Join Date: Sep 2018
Location: Stevenage
|
That is a good point about the thermostat. Better check that.
Thankyou |
The Following User Says Thank You to JDW3696 For This Useful Post: |
Mar 6th, 2021, 20:55 | #22 | |
Premier Member
Last Online: Feb 11th, 2023 20:32
Join Date: May 2010
Location: Blyth, Northumberland
|
Quote:
__________________
Ian. Since 2005: 1992 Volvo 940 estate 2.0L. Manual. Daily driver and workhorse. |
|
The Following User Says Thank You to Ian21401 For This Useful Post: |
Mar 6th, 2021, 22:50 | #23 |
Senior Member
Last Online: Jul 5th, 2023 07:30
Join Date: Sep 2018
Location: Stevenage
|
You are probably right. It just seemed to be going like the clappers when it really didn't need to be. I was going to replace it with an electric fan so will be on my to do list as that sounds like the way to go.
Firstly I need to get the injector o rings replaced and hope that sorts the lumpy idle and air leak. Narrowed it down to no 3 injector but will get all 4 done. |
The Following 2 Users Say Thank You to JDW3696 For This Useful Post: |
Mar 6th, 2021, 23:00 | #24 |
Premier Member
Last Online: Yesterday 22:49
Join Date: May 2012
Location: Lakenheath
|
Easy check on the 'stat is if the temp gauge reaches halfway (and stays there) after about 5 minutes running and doesn't drop on the motorway.
__________________
Cheers Dave Next Door to Top-Gun with a Honda CR-V & S Type Jag Volvo gone but not forgotten........ |
The Following User Says Thank You to Laird Scooby For This Useful Post: |
Mar 7th, 2021, 06:53 | #25 |
Senior Member
Last Online: Jul 5th, 2023 07:30
Join Date: Sep 2018
Location: Stevenage
|
Pretty sure it's fine. Never had any issues with the temp gauge and the heating. Works well. I know they can break at anytime but it's only two years old aswell.
I would be lost without this forum so thankyou once again. Today's job is getting the electric sunroof operating how it should and seeing if I can find the right tools to change the injector o rings. It looks okay until a press and clamp is needed to get the injectors out of the case I believe. Might attempt it though. |
The Following 2 Users Say Thank You to JDW3696 For This Useful Post: |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|