|
Information |
|
Wanted: Right hand front strut, ABS typeViews : 508 Replies : 5Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Dec 13th, 2020, 22:11 | #1 |
Master Member
Last Online: Jun 4th, 2024 19:45
Join Date: Jan 2008
Location: Bracknell, Berkshire, UK
|
Wanted: Right hand front strut, ABS type
I'm in need of a Right hand suspension strut for a ABS model, the one with a hole for a wheel speed sensor.
Any condition considered. Thanks in advance. |
Dec 13th, 2020, 23:09 | #2 |
Premier Member
Last Online: Yesterday 21:33
Join Date: May 2012
Location: Lakenheath
|
Have you broken or lost your original?
__________________
Cheers Dave Next Door to Top-Gun with a Honda CR-V & S Type Jag Volvo gone but not forgotten........ |
Dec 14th, 2020, 08:07 | #3 |
Master Member
Last Online: Jun 4th, 2024 19:45
Join Date: Jan 2008
Location: Bracknell, Berkshire, UK
|
You've obviously an inquisitive mind.
I'm keen to try messing around with data logging and traction control, for which I would like to use both front wheel speeds. For some long forgotten reason I already have one ABS strut, so need another to make a pair. |
Dec 14th, 2020, 08:25 | #4 |
Premier Member
Last Online: Yesterday 21:33
Join Date: May 2012
Location: Lakenheath
|
In fairness it was an unusual request, roused my curiosity. Good luck with the data logging, for traction control though are you not also going to need independent rear wheel speed sensors too?
__________________
Cheers Dave Next Door to Top-Gun with a Honda CR-V & S Type Jag Volvo gone but not forgotten........ |
Dec 14th, 2020, 09:00 | #5 |
Master Member
Last Online: Jun 4th, 2024 19:45
Join Date: Jan 2008
Location: Bracknell, Berkshire, UK
|
Yes, ideally individual sensors per wheel. But it can work with the single differential sensor fitted to the 240. I'll work out logging first and then decide what to do.
|
The Following User Says Thank You to crogthomas For This Useful Post: |
Dec 14th, 2020, 09:08 | #6 |
Premier Member
Last Online: Yesterday 21:33
Join Date: May 2012
Location: Lakenheath
|
Sounds like a plan! If it's any help i have an ABS ECU from a late 940 complete with plug - you'd obviously need the compatible modulator block if you wanted to go down the route of adding ABS to integrate with traction control (easier to control just one brake on a driven axle to increase traction) but the other option is find a scrap 240 and transplant the ABS system.
__________________
Cheers Dave Next Door to Top-Gun with a Honda CR-V & S Type Jag Volvo gone but not forgotten........ |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|