|
XC90 '02'15 General Forum for the P2-platform XC90 model |
Information |
|
Drive shaftsViews : 1425 Replies : 9Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Jan 25th, 2020, 17:56 | #1 |
Junior Member
Last Online: Jan 22nd, 2023 21:52
Join Date: Apr 2012
Location: bristol
|
Drive shafts
Can any one tell me when volvo changed the drive shaft splines from 36 to 40 as need new ones mine are 36 thanks d5 2006 xc90
|
Jan 27th, 2020, 20:54 | #2 |
Junior Member
Last Online: May 8th, 2024 22:30
Join Date: Aug 2018
Location: Brisbane
|
It depends on the engine/transmission, but in effect, most of those post 2006 are 40 spline, with the 3.2, D5, or V8. Even 40 spline driveshafts can be different so you need the right part number.
You can also get outer CVs if needed, but good luck getting the old one off! |
Jan 28th, 2020, 09:50 | #3 |
Junior Member
Last Online: Jan 22nd, 2023 21:52
Join Date: Apr 2012
Location: bristol
|
Heat plus 14 tonnes of pressure would not move it looks like a new drive shaft and hub unbelievable
|
Jan 28th, 2020, 12:15 | #4 |
Member
Last Online: Oct 7th, 2023 14:41
Join Date: Apr 2013
Location: UK
|
Outer CV joints are normally held on with an internal spring circlip I take it that Volvo doesnt do this and goes for an interference fit for some reason?
|
Jan 30th, 2020, 20:07 | #5 |
Junior Member
Last Online: Jan 22nd, 2023 21:52
Join Date: Apr 2012
Location: bristol
|
the outer cv joint is held on the drive shaft with a retaining clip its the outer cv into the wheel bearing thats seems pot luck if it will move
|
Jan 30th, 2020, 22:29 | #6 |
Ex Trog
Last Online: Apr 27th, 2024 08:20
Join Date: Jul 2018
Location: Norfolk
|
I have tried to get a CV Joint for my XC 60, the word i keep getting is, only a drive shaft is available, for FIVE HUNDRED POUNDS, i am not paying for a drive shaft when i don't need one, only a CV Joint, ruddy shamefull on Volvo on not being able to supply one. I some times wish i had not bought the bluddy thing.
|
Jan 31st, 2020, 17:21 | #7 |
Bungling Amateur
Last Online: Today 07:15
Join Date: Aug 2014
Location: Beverley, East Yorks
|
There are third party companies offering CV's and if it's the rear driveshaft they're shared with the Ford KUGA (you will see Volvo and FoMoCo part numbers if the label is still on).
And there's second hand - they are reliable so used ones are easy to get.
__________________
2011 XC90 D5 Executive 2003 C70 T5 GT 2012 Ford Ranger XL SC 1977 Triumph Spitfire 1500 1976 Massey Ferguson 135 |
Feb 1st, 2020, 23:30 | #8 | |
FD
Last Online: Aug 23rd, 2023 22:44
Join Date: Jan 2013
Location: Darlington
|
Quote:
Same has now happened to the off side, along with a few other extra MOT parts, no longer economically viable in my head... so bought a newer car instead. |
|
The Following User Says Thank You to Funky Diver For This Useful Post: |
Feb 3rd, 2020, 22:34 | #9 |
Senior Member
Last Online: Apr 9th, 2021 16:08
Join Date: Oct 2004
Location: S****HORPE
|
Get a second hand shaft and hub.
Hi,
I picked up a second hand 36 spline drive shaft and hub quite cheap. (About £50) Checked with the supplier that they were separated before I got them. Simple job then to swap the CV joint and any other parts needed, re fit and do the tracking. Certainly not the big costs being quoted. May help someone.
__________________
Binty XC90 D5 SE Auto (Black) Mazda MX5 Sport Tec (Black) Mercedes SLK 250d 9G auto AMG line (Black) Previous Volvos C30 Rdesign 2.0D (black), C30 Rdesign 1.6D (black), S60 T5 (black) |
Feb 3rd, 2020, 22:53 | #10 |
Bungling Amateur
Last Online: Today 07:15
Join Date: Aug 2014
Location: Beverley, East Yorks
|
Ignore the Ford reference - was thinking I was in the XC60 pages....
__________________
2011 XC90 D5 Executive 2003 C70 T5 GT 2012 Ford Ranger XL SC 1977 Triumph Spitfire 1500 1976 Massey Ferguson 135 |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|