|
850 / S70 & V70 '96-'99 / C70 '97-'05 General Forum for the 850 and P80-platform 70-series models |
Information |
|
engine management light on 'cos I didn't put a multiplug on properly!!Views : 863 Replies : 1Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Jul 2nd, 2003, 23:34 | #1 |
Guest
Location:
|
engine management light on 'cos I didn't put a multiplug on properly!!
my good deed for the day was to change a whole load of crankcase hoses on a friends 855 T5.
So off with the inlet manifold, fuel rail, injectors etc, to change the hoses to the oil separator - but on reassembly, I accidently didnt repalce no 5 injector multiplug correctly. Started car, and it ran with a mis-fire. It only took 30 seconds to figure out (the multiplug on no 5 injector). Fixed securely, but of course the engine management light on. Disconnected battery for 10 minutes, butlight still on, car runs perfectly. As a '96 model, I cant access codes/erase codes. Can I put light out by leaving battery off for longer? Or after a certain number of 'cycles' (engine started/stopped) will the ECU 'realise' no fault exists and put light out? Help! Kev |
Jul 3rd, 2003, 20:33 | #2 |
VOC Member
Last Online: Apr 10th, 2017 16:55
Join Date: Jan 1970
Location: South Kent Coast
|
RE: engine management light on 'cos I didn't put a multiplug on properly!!
See the thread "OBD on early 850" for method on '96 cars.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|