|
Information |
|
Fuel filter changeViews : 3870 Replies : 4Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Dec 18th, 2015, 14:34 | #1 |
Junior Member
Last Online: Apr 4th, 2016 09:49
Join Date: Jun 2007
Location: gillingham
|
Fuel filter change
I want to change the fuel filter on my 2013 v40 D4, I've done the oil etc. but was told it is very important to do the fuel filter as well. I've never changed one before so any instruction would be gratefully received including where its located.
Cheers in advance
__________________
|
Dec 19th, 2015, 21:35 | #2 |
Senior Member
Last Online: Jul 20th, 2023 20:06
Join Date: Dec 2010
Location: malton
|
Just above rear axle will need a filter strap as its a plastic housing just change the element clean it out new seal and tighten back up leave ignition on for a minute to self prime unless you have access to a vida you can activate the pump to bleed it. It may take a few times to bleed through but it will be fine hope this helps
|
Dec 20th, 2015, 16:09 | #3 |
Premier Member
Last Online: Jan 17th, 2022 13:13
Join Date: Apr 2010
Location: wirral
|
Does anyone know where the oil filter is and what type on a D2 2015? (ford)
__________________
Previous - S60 SE 2004 D5 (Owned 2010-2015) RIP Current - V40 R-Design NAV 2015 D2 (Owned 2015 - |
Dec 20th, 2015, 17:26 | #4 | |
VOC Member
Last Online: Feb 1st, 2023 11:27
Join Date: May 2007
Location: Rye, East Sussex
|
Quote:
Is it a 1.6 or 2 litre D2.
__________________
1984 245 SE 1986 345 SE Auto 1991 940 TD Auto 2003 XC90 D5 SE AWD Geartronic2002 V70 D5 SE Auto 2014 V40 D2 SE Tiptronic Cross Country 2017 V40 D2 Cross Country Geartronic Pro 2015 XC60 D5 Polestar SE Lux Nav AWD Geartronic |
|
Dec 21st, 2015, 11:51 | #5 | |
Junior Member
Last Online: Apr 4th, 2016 09:49
Join Date: Jun 2007
Location: gillingham
|
Quote:
It is the priming process that bothered me as i don't want to cause myself other issues if i get it wrong.
__________________
Last edited by s j l; Dec 21st, 2015 at 11:54. |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|