|
![]() |
|
Load space 12v socket conversionViews : 1169 Replies : 9Users Viewing This Thread : |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
No I'm not the redhead
Last Online: Nov 25th, 2022 09:49
Join Date: Jun 2009
Location: North Yorkshire Coast
|
![]()
Back by popular demand.....
Fancy adding a touch of modernisation to your 240? How about a fancy 12v socket to go in the boot of your car so you can run a tyre pump, cool box or whatever else you fancy? Includes everything you need to mount them in the boot including socket, blacking plate, plastic nut for securing and a good length of wire to start you off tapping them into where ever you like. These are good quality USED products originally made in Germany, not some cheapo Chinese trash I've just done this on my 240 estate. All I used that was extra was some extra wire to take the live to a source for power, a loop end connector for the earth and an inline fuse for extra protection. Please note, this will only work as well as you wire it up. I am not help responsible for any problems that may occur from "dodgy wiring" if we must call it that. I have two in total for sale. Both with over 1/2 a metre of cabling to get you on the way. £9 delivered each ![]() |
![]() |
![]() |
![]() |
#2 |
Junior Member
Last Online: May 24th, 2024 17:59
Join Date: Oct 2013
Location: Bingley
|
![]()
Just out of interest, where did you pick up the feed from??
|
![]() |
![]() |
![]() |
#3 |
No I'm not the redhead
Last Online: Nov 25th, 2022 09:49
Join Date: Jun 2009
Location: North Yorkshire Coast
|
![]()
I picked mine up from the original cigarette lighter feed and fused it in the middle.
![]() |
![]() |
![]() |
The Following User Says Thank You to Antz For This Useful Post: |
![]() |
#4 |
Senior Member
Last Online: Apr 9th, 2024 15:02
Join Date: May 2007
Location: Sheffield
|
![]()
You should always connect fuses as close as possible to the power source in order to protect the maximum amount of wiring.
|
![]() |
![]() |
![]() |
#5 |
No I'm not the redhead
Last Online: Nov 25th, 2022 09:49
Join Date: Jun 2009
Location: North Yorkshire Coast
|
![]()
Hence why I accept no responsibility for peoples wiring methods. That's up to the buyer
These are an amazingly handy thing to have in your boot. Nothing stops you fitting them to a saloon or even a none Volvo. Last edited by Antz; Feb 16th, 2014 at 18:33. |
![]() |
![]() |
![]() |
#9 |
VOC Member
Last Online: Jun 15th, 2024 22:11
Join Date: Jun 2009
Location: Swineshead/Salford
|
![]()
I'll have it , what's your Paypal address?
__________________
new engine! new car! |
![]() |
![]() |
![]() |
#10 |
No I'm not the redhead
Last Online: Nov 25th, 2022 09:49
Join Date: Jun 2009
Location: North Yorkshire Coast
|
![]()
PM on the way mate
|
![]() |
![]() |
The Following User Says Thank You to Antz For This Useful Post: |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|