overdrive top plate - Page 2

dgbalfour · Aug 4th, 2013, 22:18

Ric - it's a metric thread! M16 from memory. I originally tapped mine to 5/8 UNC which I thought was right, only to find the switch wouldn't go in.

Would be worth getting somebody else's opinion though, my memory may be wrong.

Dave

DJS · Aug 4th, 2013, 22:52

Hi Dave,

Myself and Ric checked the thread at the weekend.

I think you are right. The only thing we could think of, was that it was an M16 x2mm pitch thread. I'm not sure it can be anything else.

Cheers,

Darren.

red122 · Aug 26th, 2013, 22:28

Quote:

Originally Posted by tail

and they do a rear panel now as well, that site was well worth a look

brookhouse sell this also

morningstar96 · Jan 20th, 2014, 15:26

hi david

thankyou for reply to my plea for a amazon gearbox.
i'm new to the forum so not to sure how it works.
i'm i9nterested in the gearbox you have and wondered if you call
me on 01283-213033

regards mike

Carlsson 986 · Jan 20th, 2014, 17:54

Mike hi,

I've received this post from you for a gearbox, but don't know if it's meant for me - as I have a box spare too having got an M41 now fitted.

It says to 'david' so probably not! If I can help, just ask.

Cheers Ric

Jan 20th, 2014, 15:26	#14
morningstar96 New Member Last Online: Mar 28th, 2022 11:51 Join Date: Jan 2014 Location: swadlincote	gearbox hi david thankyou for reply to my plea for a amazon gearbox. i'm new to the forum so not to sure how it works. i'm i9nterested in the gearbox you have and wondered if you call me on 01283-213033 regards mike

Jan 20th, 2014, 17:54	#15
Carlsson 986 Senior Member Last Online: Jan 17th, 2024 15:04 Join Date: Dec 2011 Location: Kenilworth	Gearbox Mike hi, I've received this post from you for a gearbox, but don't know if it's meant for me - as I have a box spare too having got an M41 now fitted. It says to 'david' so probably not! If I can help, just ask. Cheers Ric

Aug 4th, 2013, 22:18	#11
dgbalfour VOC Member Last Online: Yesterday 16:16 Join Date: Jan 2006 Location: Bedford	Ric - it's a metric thread! M16 from memory. I originally tapped mine to 5/8 UNC which I thought was right, only to find the switch wouldn't go in. Would be worth getting somebody else's opinion though, my memory may be wrong. Dave

Aug 4th, 2013, 22:52	#12
DJS Senior Member Last Online: Aug 22nd, 2022 21:05 Join Date: Oct 2008 Location: Warwickshire	Hi Dave, Myself and Ric checked the thread at the weekend. I think you are right. The only thing we could think of, was that it was an M16 x2mm pitch thread. I'm not sure it can be anything else. Cheers, Darren.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)