|
XC90 '02–'15 General Forum for the P2-platform XC90 model |
![]() |
|
fuel filter removalViews : 1240 Replies : 8Users Viewing This Thread : |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
xc90, volvo number five
Last Online: Jun 8th, 2024 23:08
Join Date: Dec 2005
Location: Grappenhall
|
![]()
I tried to remove the fuel filter by hand today, no way, far too tight, searching the forum, a strap wrench is recomended,is that the best way or is there a better option ?
dave |
![]() |
![]() |
![]() |
#2 |
Master Member
Last Online: Dec 22nd, 2023 10:53
Join Date: Dec 2006
Location: Leeds
|
![]()
I changed mine recently d5 163bhp...bloody tight fit, and i reused the old seal as the filter would not go on with the new filter seal. I used a strap wrench for removal and fitting.
|
![]() |
![]() |
The Following User Says Thank You to chb For This Useful Post: |
![]() |
#3 | |
Master Member
Last Online: Feb 3rd, 2024 18:39
Join Date: Sep 2009
Location: Sunny Scotland
|
![]() Quote:
David
__________________
My Weather Station |
|
![]() |
![]() |
The Following User Says Thank You to BestGear For This Useful Post: |
![]() |
#4 |
Member
Last Online: Feb 17th, 2024 10:52
Join Date: Jul 2010
Location: Stockton on Tees
|
![]() |
![]() |
![]() |
The Following User Says Thank You to dd1898 For This Useful Post: |
![]() |
#5 |
Senior Member
Last Online: Jun 9th, 2022 17:33
Join Date: Jun 2006
Location: Kent
|
![]()
I need to do mine. I have a chain wrench and was going to use an old drive belt to protect the plastic casing of the filter as worried that without it could split the plastic.
__________________
Me: 2001 V70 2.4 SE Wife: 2004 XC90 D5 SE |
![]() |
![]() |
![]() |
#6 |
xc90, volvo number five
Last Online: Jun 8th, 2024 23:08
Join Date: Dec 2005
Location: Grappenhall
|
![]()
thanks for the advice, will try a strap wrench, just thought Id check first
dave |
![]() |
![]() |
![]() |
#7 |
New Member
Last Online: Aug 22nd, 2018 20:24
Join Date: Nov 2011
Location: helmsdale
|
![]()
Hi Dave,
Did you manage to get it off. The whole thing was flexing and I was scared to give it too much just in case it broke. Mark |
![]() |
![]() |
![]() |
#8 |
xc90, volvo number five
Last Online: Jun 8th, 2024 23:08
Join Date: Dec 2005
Location: Grappenhall
|
![]()
not yet, Im waiting for the weather to warm up, just in case the low temp makes the plastic brittle ! yes I know im a coward
dave |
![]() |
![]() |
![]() |
#9 |
Junior Member
Last Online: Jun 14th, 2020 09:44
Join Date: Jan 2012
Location: Forest of Dean
|
![]()
Having the same trouble. I have a very good, half inch drive strap wrench and still mine wont budge. Very worried about breaking the plastic casing. Is there anything else to take off the filter casing before removal? Or is it simply a case of wrapping the strap around what is visible and applying pressure. At 6'4" & 17 Stone I suspect I have enough strength to break the casing.
|
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|