|
S40 / V40 '96-'04 General Forum for the Volvo S40 and V40 (Classic) Series from 1995-2004. |
![]() |
|
resetting ECUViews : 49312 Replies : 21Users Viewing This Thread : |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Idiot
Last Online: Apr 21st, 2019 17:29
Join Date: Nov 2006
Location: Derby
|
![]()
Ive heard you can reset the ECU by disconecting the battery over night. Is there a faster way of doing this? i read that also it can be wiped by disconecting the battery while the ignition turned on. Woudl this be quicker and not damage it? i want to do this as i have no code reader and want to reset it incase there was anything the ecu was doing to limit anything it shouldnt be. Then ill be starting from a level. thanks
__________________
Vectra VXR estate convert Experience = V40 1998 2.0 CD lots of mods Busy pestering the poor sods here now |
![]() |
![]() |
![]() |
#2 |
Senior Member
Last Online: Jun 8th, 2024 12:56
Join Date: Nov 2008
Location: stafford
|
![]()
I got a U380 code reader on e-bay fairly cheap, works well on my phase 2 t4 and on my mates 98 t5, should work on yours. Much better to read the codes than just wipe them.
Keith... |
![]() |
![]() |
![]() |
#4 |
Member
Last Online: Dec 2nd, 2021 16:18
Join Date: Nov 2009
Location: Essex
|
![]()
Disconnect the battery
Connect the two battety leads together (NOTE - THE LEADS NOT THE BATTERY!!!)with a jump lead or piece of wire. Turn ignition key to on & leave for 15 minutes. Turn ignition off. Reconnect battery. |
![]() |
![]() |
![]() |
#5 |
mitsy V40
Last Online: Apr 8th, 2010 01:45
Join Date: May 2009
Location: macclesfield
|
![]()
it may need to re learn its values after batt disconect so you may have eratic idle i will tell you how if so, its been posted before
|
![]() |
![]() |
![]() |
#6 |
Premier Member
Last Online: Mar 18th, 2011 13:38
Join Date: May 2009
Location: grassmere!
|
![]()
usually removing the fuse for the ECM for 1 hour will reset the adaptation.
__________________
![]() |
![]() |
![]() |
![]() |
#7 |
Resting between Volvos
Last Online: Sep 9th, 2021 16:46
Join Date: Feb 2010
Location: Gateshead
|
![]()
Hi
Does re-setting cause any problems, and will it re-set warning lights? We have acquired a V40 1.8 petrol and the airbag light is on, occasionally the immobiliser light also comes on but does not seem to affect the running etc. |
![]() |
![]() |
![]() |
#8 |
Member
Last Online: Dec 2nd, 2021 16:18
Join Date: Nov 2009
Location: Essex
|
![]()
It will initially clear warning lights but if the underlying fault still exists tey will illuminate again
|
![]() |
![]() |
![]() |
#9 |
New Member
Last Online: Jul 17th, 2012 15:04
Join Date: Mar 2012
Location: Leigh
|
![]()
Hi Guys,
Does this actually work? I need to reset the check engine light to start from fresh, I have OBDII / EOBD readers and I cannot read the faults on the ECU. Car seems to drive ok has issues accelerating from 60 - 70mph after visiting a garage to change tyres and what they called a free car inspection however I couldnt see what they were doing under the car. I'm hoping this will be a loose connector in the end (something the garage has pulled out) and nothing serious. Thanks in advance guys |
![]() |
![]() |
![]() |
#10 | |
New Member
Last Online: Oct 21st, 2012 12:40
Join Date: Aug 2012
Location: carletonville
|
![]() Quote:
![]() |
|
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|