|
XC90 '02–'15 General Forum for the P2-platform XC90 model |
Information |
|
Prop shaft sized into haldex flange :-(Views : 499 Replies : 1Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Jan 29th, 2022, 16:43 | #1 |
New Member
Last Online: Feb 19th, 2022 09:09
Join Date: May 2019
Location: Acharacle
|
Prop shaft sized into haldex flange :-(
Hi everyone,
I’m struggling at the minutes trying to replace my pump on a gen 3 haldex. I have removed the bolts for the prop shaft but it’s stuck in there. 2 extra holes in the back of the flange don’t have threads so I can’t push it out from the back. Tried putting a bolt in there and hammering it. Tried bashing it with a hammer too. Been soaking in penetrating oil for a few days. Anyone else had any experience removing these? Had 2 days on it now haha. Added some images below https://imgur.com/a/QE8lqIh Any help would be appreciated 😬 |
Jan 29th, 2022, 23:58 | #2 |
Premier Member
Last Online: Dec 23rd, 2023 14:13
Join Date: Apr 2011
Location: .
|
Have you tried dropping the centre bearing? If that doesn’t relieve it a heavy copper hammer should
|
Tags |
awd d5, haldex, xc90 2006 |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|