|
![]() |
|
C70 2007 roof stopped workingViews : 776 Replies : 6Users Viewing This Thread : |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
New Member
Last Online: Apr 20th, 2021 19:07
Join Date: Jan 2021
Location: THATCHAM
|
![]()
looking for a Hall Sensor position 12 part number 1385262
|
![]() |
![]() |
![]() |
#2 |
Experienced Member
Last Online: Today 13:12
Join Date: Jun 2007
Location: L/H side
|
![]()
Highly unlikely to be the sensor , have you fault traced it? Usually broken wires where the loom bends ..
__________________
|
![]() |
![]() |
![]() |
#3 |
New Member
Last Online: Apr 20th, 2021 19:07
Join Date: Jan 2021
Location: THATCHAM
|
![]() |
![]() |
![]() |
![]() |
#4 |
Experienced Member
Last Online: Today 13:12
Join Date: Jun 2007
Location: L/H side
|
![]()
Have you checked continuity of the 2 wires from ECU to sensor ? wiggle the loom whilst checking ,where it bends every time the roof goes up and down ..
__________________
|
![]() |
![]() |
![]() |
#5 |
New Member
Last Online: Apr 20th, 2021 19:07
Join Date: Jan 2021
Location: THATCHAM
|
![]()
there were a couple of wires badly connected before and after the sensor - looks like sensor was replaced and wired badly - fixed these and it still wont work. I will carry on checking the wire down to where the boot folds back
|
![]() |
![]() |
![]() |
#6 | |
Old Rocker
Last Online: Today 06:44
Join Date: Dec 2016
Location: Tring
|
![]() Quote:
Unfortunately pressing the yellow button disables the roof, and I have to work on the car outdoors!
__________________
Just my opinion, please don't shoot me if it doesn't match yours! 2011 C70 D3 (now sold)and JZR 3 wheeler |
|
![]() |
![]() |
![]() |
#7 | |
Experienced Member
Last Online: Today 13:12
Join Date: Jun 2007
Location: L/H side
|
![]() Quote:
__________________
|
|
![]() |
![]() |
The Following User Says Thank You to Clan For This Useful Post: |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|