|
200 Series General Forum for the Volvo 240 and 260 cars |
Information |
|
OIL! Help please....Views : 2906 Replies : 42Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Feb 12th, 2011, 17:18 | #11 |
Senior Member
Last Online: Jan 15th, 2019 20:45
Join Date: Jan 2009
Location: Newcastle
|
Right... Bloody hell. Had a go at the flame trap thing today.
So, I found the little thing I was looking for, at least I bloody think it was the right bit. It was a right pain to get to. Finding the thing was hard enough, loads of thanks to Wooble for the location advice, Haynes was a bit hopeless with the diagrams and stuff... Once it was out the plastic nossle type thing was, as said, totally gunked up. It looked like grease more than old oil. The flame trap, strainer thing, was not going to budge. It took a screw through the centre, then chipping away to the plastic housing, before it finally popped out. Cleaned the tubes and then fixed it all back together again. Now, I've got fairly small hands, so how the hell some people manage to get it all back together... Anyway, with it all back together, ran the engine, and oddly the oil cap is still bopping around on top. So, some of it may not be totally clear. But at least I know where it all is now, and how it goes together and comes apart. Luckily I didn't break anything while I was in there. I took a few pictures, I was going to put together a How-to but I'm not sure I'm qualified. Going to get that rocker cover off during the week. That should be fun. |
The Following 3 Users Say Thank You to yragyrag90 For This Useful Post: |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|