SRS Airbag Service Urgent

MartyButler · Jan 6th, 2022, 13:40

My Volvo 2011 XC90 2.4D AWD automatic has the following message on the DIM.
"SRS Airbag Service Urgent"

The reason why it popped up was when I went to change the internal cabin temp sensor (in behind the 3 slots on the CCM) I switched on the ignition so that I could move the gearstick out of the way of the CCM.
Now I have a working cabin temp sensor but every time I switch on the ignition I have "SRS Airbag Service Urgent" and even after you press the "Read" button on the stack the Yellow Triangle stays on in the middle of the dash.

This is were it gets interesting, I have an old laptop that I bought years ago with Vida loaded on it and the dice which has always worked fine for me. When I scan the car the fault code that comes up for it is "SRS-E003 Configuration Fault Faulty Configuration" when I go to fault trace it it doesn't say much except for configuration ID's and open circuits. The open circuits I checked and ruled out but the ID's I can't do much about. When I look at the timeline of the fault (Vida) it is telling me that the fault isn't active and that there has now being over 300 starts/cycles since the one time that the fault appeared.
My problem is Vida isn't clearing the fault and to be honest I don't know if it is because it's not able too or is it because Vida is looking for an "eUpdate".

Any help or suggestions that people might have will be greatly appreciated.

Jan 6th, 2022, 13:40	#1
MartyButler Junior Member Last Online: Apr 10th, 2024 14:51 Join Date: Feb 2013 Location: Cork	SRS Airbag Service Urgent My Volvo 2011 XC90 2.4D AWD automatic has the following message on the DIM. "SRS Airbag Service Urgent" The reason why it popped up was when I went to change the internal cabin temp sensor (in behind the 3 slots on the CCM) I switched on the ignition so that I could move the gearstick out of the way of the CCM. Now I have a working cabin temp sensor but every time I switch on the ignition I have "SRS Airbag Service Urgent" and even after you press the "Read" button on the stack the Yellow Triangle stays on in the middle of the dash. This is were it gets interesting, I have an old laptop that I bought years ago with Vida loaded on it and the dice which has always worked fine for me. When I scan the car the fault code that comes up for it is "SRS-E003 Configuration Fault Faulty Configuration" when I go to fault trace it it doesn't say much except for configuration ID's and open circuits. The open circuits I checked and ruled out but the ID's I can't do much about. When I look at the timeline of the fault (Vida) it is telling me that the fault isn't active and that there has now being over 300 starts/cycles since the one time that the fault appeared. My problem is Vida isn't clearing the fault and to be honest I don't know if it is because it's not able too or is it because Vida is looking for an "eUpdate". Any help or suggestions that people might have will be greatly appreciated.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)