|
700/900 Series General Forum for the Volvo 740, 760, 780, 940, 960 & S/V90 cars |
Information |
|
Door Seal Leaking WaterViews : 1557 Replies : 13Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Nov 2nd, 2021, 14:02 | #11 | |
Premier Member
Last Online: Today 08:26
Join Date: May 2012
Location: Lakenheath
|
Quote:
Even if you have to buy a 1m length to prove whether it will work, it's still cheaper than buying the full length you need and then finding it's not suitable. I used their Cortina Mk3/4/5 boot seal on the boots of my Rover Coupe and saloon as it was near identical to the original and very pleased i was with it as well. In that application is does provide waterproofing so i could tell things had improved as i once more had a dry boot - always useful! The original seal was a continuous section, i.e. joined in the middle so when i fitted the new stuff, i made sure the ends were square cut and the seal was a smidge too long then used superglue to make the exact join like the original. Probably overkill and picky/nerdish but as far as i was concerned, made that vital little bit of difference. No idea if the Volvo door seals are also continuous but if so, handy to know it's easy to join one end to the other.
__________________
Cheers Dave Next Door to Top-Gun with a Honda CR-V & S Type Jag Volvo gone but not forgotten........ |
|
The Following User Says Thank You to Laird Scooby For This Useful Post: |
Tags |
940, door, leak, seal, water |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|