|
S80 '06-'16 / V70 & XC70 '07-'16 General Forum for the P3-platform S80 and 70-series models |
![]() |
|
Cup Holder spillViews : 1948 Replies : 2Users Viewing This Thread : |
|
Thread Tools | Display Modes |
![]() |
#1 |
Member
Last Online: Nov 21st, 2013 14:28
Join Date: Dec 2004
Location: London
|
![]()
Hi all
New shape S80 here, opened a can of coke while it was in the holder but I guess it was more shook up than I thought Didn't open it fully as it started to fizz out and then I had to start concentrating on the driving! Was a fairly big puddle in the cup holder and after about 5minutes, I managed to reach for some tissues and put them in there After another 5-10 mins, I checked and most of the coke had gone My Question is: Though the tissues were soaked with the coke, I don't think it was enough for the amount of coke that was spilt Where could it have gone (if it has gone at all?) I took out the rubber mat where I noticed a hole in the middle with a bolt under it but the bolt/nut didnt really look wet and the surrounding areas under the mat were not really that wet Could this be a problem if the cokes gone in or is the whole arm rest/cup holder area a single unit without affecting anything? thanks!
__________________
Achievement is largely the product of steadily raising one's levels of aspiration and expectation. (Jack Nicklaus) |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|