Vdash diagnostic code XC40

[smabob]

Hi Guys,

recently scanned my xc40 with VDASH, i am a novice and unfortunately i am unable to make out what the code below are for: ANY HELP WELCOMED.

ECM-P119F68 Dependability ECM related fault, service required. Algorithm Based Failures. Event information.

ECM-P061564 Starter Relay Circuit. Algorithm Based Failures. Signal plausibility failure.

ECM-P124968 Dependability ECM Related Fault, Service Urgent. Algorithm Based Failures. Event information.

HCMR-U2D3E82 Corrupted signal received from another control module. Bus Signal / Message Failures. Alive / sequence
counter incorrect / not updated.

PSCM-U300316 Battery Voltage. General Electrical Failures. Circuit voltage below threshold.

PSCM-U2E0468 ECU Supply Voltage Too Low. Algorithm Based Failures. Event information.

VCU1-C107593 Brake Actuator. Component Failures. No operation.

MVCM-B163D01 Ground Point Disconnect. . General electrical failure.

MVCM-B165501 12V power disconnected. . General electrical failure.

[Bungle1976]

Originally Posted by smabob

Hi Guys,

recently scanned my xc40 with VDASH, i am a novice and unfortunately i am unable to make out what the code below are for: ANY HELP WELCOMED.

I'm not an expert in VDASH, but the majority of those codes look to be related to a low battery/battery disconnect. Assuming that you are no longer having battery issues I would clear them and see what (if anything) comes back.

[Simmy]

is your car showing any symptoms? if not these codes may be historic from a previous event but all could be triggered by a low voltage event.