S40 (New) Engine 2.4 : - Is a hose missing

erubin2000 · Jun 15th, 2024, 04:06

2007 Volvo S40, 2.4L Engine B5244S7. Non turbo automatic trans.

The EVAP Purge Valve P/N 8653909 has a 2 pin connector and a hose running to the bottom of the intake manifold (near the throttle body). This relatively small hose is connected and good. But on the bottom of the valve there is a ~3/4" nipple but nothing connected to it. Occasionally it makes a suction sound when the engine is idling and sucks air into this valve. Should there be a hose attached to it? If yes, where does the other end of this missing hose go? The image shows the nipple facing up but it actually faces down when the purge valve is mounted (with a rubber sleeve) to a steel bracket.

erubin2000 · Jun 15th, 2024, 20:57

Did some research and it appears that I'm missing hose 8658723. Dont know where the other end attaches. Hose #6 attaches to valve #15. Where does other end of hose attach?

erubin2000 · Jun 16th, 2024, 20:10

I've searched for an hour and still dont see where my missing hose would connect. One end goes to the purge valve. The other end I dont see anything within 6" that has a fitting. Any suggestions?

erubin2000 · Yesterday, 00:55

I removed the battery and the battery tray. The hose was beneath/behind the battery. All hooked up and good.

Jun 16th, 2024, 20:10	#3
erubin2000 New Member Last Online: Yesterday 00:55 Join Date: May 2023 Location: LOS ANGELES	I've searched for an hour and still dont see where my missing hose would connect. One end goes to the purge valve. The other end I dont see anything within 6" that has a fitting. Any suggestions?

Yesterday, 00:55	#4
erubin2000 New Member Last Online: Yesterday 00:55 Join Date: May 2023 Location: LOS ANGELES	I removed the battery and the battery tray. The hose was beneath/behind the battery. All hooked up and good.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)